science and technology of advanced materials

Frontiers in microbiology

Bioelectrochemistry (Amsterdam, Netherlands)

[1] Microbiologically influenced corrosion of 304 stainless steel by nitrate reducing Bacillus cereus in simulated Beijing soil solution.

[2] Effect of Selected Environmental Factors on the Microbicidal Effectiveness of Radiant Catalytic Ionization.

[3] Preliminary Study on Fluidized Bed Chemical Mechanical Polishing (FB-CMP) Process for Stainless Steel 304 (SS304)

[4] Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing.

[5] microstructural and thermal stability of selective laser melted 316l stainless steel single tracks

[6] non-destructive electrochemical testing for stainless-steel components with complex geometry using innovative gel electrolytes

[7] fabrication, structural characterization and uniaxial tensile properties of novel sintered multi-layer wire mesh porous plates

[8] monitoring of focusing tube wear during abrasive waterjet (awj) cutting of aisi 309

[9] bacterial adherence to different inert surfaces evaluated by epifluorescence microscopy and plate count method

[10] inactivation of foodborne bacteria biofilms by aqueous and gaseous ozone

[11] sur l'utilisation des aciers inoxydables dans les installations vinicoles

[12] models to predict the viscosity of metal injection molding feedstock materials as function of their formulation

[13] Cosmogenic radionuclides in metals as indicator for sea level exposure history

[14] Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings

[15] Evaluation of the force generated by gradual deflection of 0.016-inch NiTi and stainless steel orthodontic wires in self-ligating metallic and esthetic brackets.

[16] INVESTIGATION OF WEAR BEHAVIOR OF BORONIZED AISI 316 STAINLESS STEEL

[17] INVESTIGATION OF WEAR BEHAVIOR OF BORONIZED AISI 316 STAINLESS STEEL

[18] Dependency of Bead Geometry Formation During Weld Deposition of 316 Stainless Steel Over Constructional Steel Plate

[19] Microstructure and intergranular corrosion of the austenitic stainless steel 1.4970

[20] Thermal cycling induced stress–assisted sigma phase formation in super duplex stainless steel

[21] An insight into oversaturated deformation-induced sigma precipitation in Super304H austenitic stainless steel

[22] Effect of Food Residues in Biofilm Formation on Stainless Steel and Polystyrene Surfaces by Salmonella enterica Strains Isolated from Poultry Houses

[23] Ultrasonic Measurement of Stress in SLM 316L Stainless Steel Forming Parts Manufactured Using Different Scanning Strategies.

[24] Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance.

[25] Mechanical properties of lightweight 316L stainless steel lattice structures fabricated by selective laser melting

[26] Investigation of tribo-mechanical properties and structure of specimens obtained by selective laser melting of stainless steel powders

[27] Thermodynamic reasoning for colossal N supersaturation in austenitic and ferritic stainless steels during low-temperature nitridation

[28] Formation mechanism of multilayer aluminide coating on 316L stainless steel by low-temperature pack cementation

[29] Preparation of titanizing coating on AISI 316 stainless steel by pack cementation to mitigate surface damage: Estimations of corrosion resistance and tribological behavior

[30] Cr<inf>2</inf>N coated martensitic stainless steels by pack cementation process as materials for bipolar plates of proton exchange membrane fuel cells

[31] Finite element simulation of plastic deformation of 316ln stainless steel during automated ball indentation test

[32] Study on time-temperature-transformation diagrams of stainless steel using machine-learning approach

[33] Corrosion mechanisms of 316L stainless steel in supercritical water: The significant effect of work hardening induced by surface finishes

[34] Influence of the surface finish on corrosion resistance of stainless steels through machining and remelting on weld bead

[35] Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density.

[36] The role of service-induced residual stresses in initiating and propagating stress corrosion cracking (SCC) in a 316 stainless steel pressure-relief-valve nozzle set

[37] Sono-electrodeposition of novel bismuth sulfide films on the stainless steel mesh: Photocatalytic reduction of Cr (VI).

[38] Friction-stir processing of AISI 440C high-carbon martensitic stainless steel for improving hardness and corrosion resistance

[39] A comprehensive investigation on the effect of flood and MQL coolant on the machinability and stress corrosion cracking of super duplex stainless steel

[40] Manufacture of Co-containing coating on AISI430 stainless steel via pack cementation approach for SOFC interconnect

[41] Stainless steel wire in a figure-of-eight for repair of distal femoral physeal fractures in ten cats: a case report.

[42] Slag recycling in submerged arc welding and its effects on the quality of stainless steel claddings

[43] Research of formation of deposits in technological devices and corrosion of contact devices from stainless steel

[44] Corrosion behaviour of 2205 duplex stainless steel in marine conditions containing Erythrobacter pelagi bacteria

[45] Evaluation of strength of stainless steel bolt without heat treatment considering Bauschinger effect during manufacturing process

[46] Selective laser melting and heat treatment of precipitation hardening stainless steel with a refined microstructure and excellent mechanical properties

[47] Effects of crack orientation and heat treatment on fatigue-crack-growth behavior of AM 17-4 PH stainless steel

[48] Heat-treatment effects on a bimetallic additively-manufactured structure (BAMS) of the low-carbon steel and austenitic-stainless steel

[49] Effects of heat treatment on microstructure and mechanical properties of explosive welded 10CrNi3MoV steel – 304L stainless steel

[50] Microstructural evolution and oxidation behaviour of CF8A austenitic stainless steel during corrosion fatigue in a simulated pressurised water reactor environment

[51] Mild Steel and Stainless Steel Welding Fumes Elicit Pro-Inflammatory and Pro-Oxidant Effects in First Trimester Trophoblast Cells.

[52] Process characteristics and interfacial microstructure in spot impact welding of titanium to stainless steel

[53] EFFECTS OF ELECTRODE DEFORMATION OF RESISTANCE SPOT WELDING ON 304 AUSTENITIC STAINLESS STEEL WELD GEOMETRY

[54] Strain Range Dependent Cyclic Hardening of 08Ch18N10T Stainless Steel-Experiments and Simulations.

[55] Microbiologically influenced corrosion of 304 stainless steel by nitrate reducing Bacillus cereus in simulated Beijing soil solution.

[56] A Novel Design to Enhance the Mechanical Properties in Cu-Bearing Antibacterial Stainless Steel.

[57] Effects of heat treatment on microstructure, mechanical and corrosion properties of 15-5 PH stainless steel parts built by selective laser melting process

[58] Effect of heat treatment on interface microstructure of carbon steel/stainless steel dual-liquid casting composite plate

[59] Water quality induced corrosion of stainless steel valves during long-term service in a reverse osmosis system

[60] A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of Repair Welding on 304 Stainless Steel: Part II-Effects of Reinforcement Height.

[61] A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of Repair Welding on 304 Stainless Steel: Part I-Effects of Heat Input.

[62] Assessment of occupational exposure to stainless steel welding fumes – A human biomonitoring study

[63] A Comparison Study of Constitutive Equation, Neural Networks, and Support Vector Regression for Modeling Hot Deformation of 316L Stainless Steel

[64] Preliminary Study on Fluidized Bed Chemical Mechanical Polishing (FB-CMP) Process for Stainless Steel 304 (SS304)

[65] Effect of Alkaline Artificial Seawater Environment on the Corrosion Behaviour of Duplex Stainless Steel 2205

[66] Effect of Alkaline Artificial Seawater Environment on the Corrosion Behaviour of Duplex Stainless Steel 2205

[67] Corrosion Susceptibility of Cr–Mo Steels and Ferritic Stainless Steels in Biomass-Derived Pyrolysis Oil Constituents

[68] nano-structure tio2 film coating on 316l stainless steel via sol-gel technique for blood compatibility improvement

[69] buckling and post-buckling of prestressed stainless steel stayed columns

[70] comparison between the national prototype of the kilogram and stainless steel mass standards

[71] the effect of shielding-gas compositions on the microstructure and mechanical properties of austenitic stainless steel weldments

[72] heat transfer performance of an oil jet impinging on a downward-facing stainless steel plate

[73] dynamic recrystallization and hot workability of 316ln stainless steel

[74] refinement of the magnetic composite model of type 304 stainless steel by considering misoriented ferromagnetic martensite particles

[75] microstructural and thermal stability of selective laser melted 316l stainless steel single tracks

[76] analysis of stainless steel clasp wire tensile strength and its effect after immersion on denture cleanser solution (a research)

[77] development of a tic/cr23c6 composite coating on a 304 stainless steel substrate through a tungsten inert gas process

[78] rotary bending as a mean for improving micro-cleanliness of stainless steels for high demanding applications

[79] friction stir welding of super duplex stainless steel of uns s32750, its microstructure evaluation, mechanical and corrosion properties

[80] fabrication of porous stainless steel 316l for biomedical applications

[81] evaluation of load-deflection properties of fiber-reinforced composites and its comparison with stainless steel wires

[82] effects of sp2/sp3 ratio and hydrogen content on in vitro bending and frictional performance of dlc-coated orthodontic stainless steels

[83] effect of grain size on the corrosion behavior of 304l stainless steel

[84] anticorrosive properties of poly(o-phenylenediamine)/zno nanocomposites coated stainless steel

[85] study of the mechanical properties of a nanostructured surface layer on 316l stainless steel

[86] desenvolvimento da ferrita delta na solda e zta resultante de soldagem plasma pulsada em um aço inoxidável supermartensítico delta-ferrite development in weld and haz produced by pulsed plasma arc welding in a supermartensitic stainless steel

[87] prevention of burn-on defect on surface of hydroturbine blade casting of ultra-low-carbon refining stainless steel

[88] separation of electrolytic reduction product from stainless steel wire mesh cathode basket via salt draining and reuse of the cathode basket

[89] analysis of the influence of the anisotropy induced by cold rolling on duplex and super-austenitic stainless steels

[90] physisorption of ammonia on aisi 304l stainless steel at different surface temperature under high vacuum conditions

[91] pitting corrosion of stainless steel at the various surface treatment

[92] intergranular corrosion of low cr ferritic stainless steel 429 evaluated by the optimized double loop electrochemical potentiokinetic reactivation test

[93] utilização do subproduto da recuperação metálica de escórias de aços inoxidáveis na síntese de pigmentos cerâmicos; caracterização da matéria-prima by-product utilization of metallic recovering of stainless steel slags in the ceramic pigments synthesis; raw material characterization

[94] finite element modelling and characterization of friction welding on uns s31803 duplex stainless steel joints

[95] corrosion behavior of austenitic and duplex stainless steels in lithium bromide

[96] an investigation into crystalline phases and nano structural and mechanical properties of hh heat resistant stainless steels

[97] effect of grain refinement on deformation mechanism and mechanical properties of austenitic stainless steel

[98] comparison of deformation behavior of 316l stainless steel and ti6al4v alloy applied in traumatology

[99] diffusivity of point defects in the passive film on stainless steel

[100] anticorrosion coating of carbon nanotube/polytetrafluoroethylene composite film on the stainless steel bipolar plate for proton exchange membrane fuel cells

[101] effect of nitrogen content on hot deformation behavior and grain growth in nuclear grade 316ln stainless steel