Scientific reports

Acta biomaterialia

materials science & engineering c, materials for biological applications

International journal of environmental research and public health

Clinical oral investigations

Journal of the mechanical behavior of biomedical materials

journal of biomedical materials research part b, applied biomaterials

Kardiologiia

the japanese dental science review

journal of prosthodontic research

[1] Zirconia surface modifications for implant dentistry.

[2] Dental prostheses mimic the natural enamel behavior under functional loading: A review article.

[3] Fracture loads of screw-retained implant-supported zirconia prostheses after thermal and mechanical stress.

[4] [Lipoprotein(а) Level, Apolipoprotein(а) Polymorphism аnd Autoаntibodies Against Lipoprotein(а) in Patients with Stenotic Cаrotid Atherosclerosis].

[5] Effect of diaphragm and abdominal muscle training on pelvic floor strength and endurance: results of a prospective randomized trial.

[6] Release of zirconia nanoparticles at the metal stem-bone cement interface in implant loosening of total hip replacements.

[7] Novel laser textured surface designs for improved zirconia implants performance.

[8] Inhibition of bacterial growth on zirconia abutment with a helium cold atmospheric plasma jet treatment.

[9] Erratum: Ten Bosch et al. Cold Atmospheric Pressure Plasma Comb-A Physical Approach for Pediculosis Treatment.

[10] Load bearing capacity and Weibull characteristics of inlay-retained resin-bonded fixed dental prosthesis made of all-ceramic, fiber-reinforced composite and metal-ceramic after cyclic loading.

[11] Glow Discharge Plasma Treatment on Zirconia Surface to Enhance Osteoblastic-Like Cell Differentiation and Antimicrobial Effects

[12] kinetic study of selective gas-phase oxidation of isopropanol to acetone using monoclinic zro2 as a catalyst

[13] efeito da segregação e solubilização do mgo na morfologia de pós de zro2 durante a síntese pelo método pechini effect of mgo segregation and solubilization on the morphology of zro2 powders during synthesis by the pechini's method

[14] dental adhesion enhancement on zirconia inspired by mussel’s priming strategy using catechol

[15] Combined application of femtosecond laser and air-abrasion protocols to monolithic zirconia at different sintering stages: Effects on surface roughness and resin bond strength.

[16] synthesis and characterization of mcm-41-supported nano zirconia catalysts

[17] the effect of wo3 modification of zro2 support on the ni-catalyzed dry reforming of biogas reaction for syngas production

[18] fabrication and characterization of nanoporous niobia, and nanotubular tantala, titania and zirconia via anodization

[19] vanadium supported on alumina and/or zirconia catalysts for the selective transformation of ethane and methanol

[20] influence of manganese on the sintering properties of tetragonal zirconia

[21] a facile preparation method of zro2 hollow sphere using pva microcapsule as a template

[22] experimental investigation on ductile mode micro-milling of zro2 ceramics with diamond-coated end mills

[23] effect of ultraviolet photofunctionalisation on the cell attractiveness of zirconia implant materials

[24] Fretting corrosion behaviour of Ti-6Al-4V reinforced with zirconia in foetal bovine serum.

[25] Highly selective microglial uptake of ceria-zirconia nanoparticles for enhanced analgesic treatment of neuropathic pain.

[26] A study on the electrophoretic deposition of gadolinium doped ceria on polypyrrole coated yttrium stabilized zirconia.

[27] Catalytic activity of Cu and Co supported on ceria-yttria-zirconia oxides for the diesel soot combustion reaction in the presence of NO<inf>x</inf>

[28] Role of a low level of La<inf>2</inf>O<inf>3</inf> dopant on the tetragonal-to-monoclinic phase transformation of ceria-yttria co-stabilized zirconia

[29] Structure and transport properties of zirconia crystals co-doped by scandia, ceria and yttria

[30] Veneered zirconia abutments cemented on non-original titanium bases: 1-year results of a prospective case series

[31] The mechanism of room temperature catalytic C–H dissociation and oxygenation of formaldehyde over nano-zirconia phase-junction

[32] PERFORMANCE OF ZIRCONIA THERMAL BARRIER COATINGS IN DIESEL ENGINES. AN OVERVIEW.

[33] Upgrading of zirconia membrane performance in removal of hazardous VOCs from water by surface functionalization

[34] Retention of zirconia copings on zirconia implant abutments cemented with provisional luting agents.

[35] CAD/CAM Zirconia vs. slip-cast glass-infiltrated Alumina/Zirconia all-ceramic crowns: 2-year results of a randomized controlled clinical trial

[36] The influence of zirconia coping designs on maximum principal stress distribution in all-ceramic premolar crowns: A finite element analysis.

[37] Zirconia surface modifications for implant dentistry.

[38] Grinding, polishing and glazing of the occlusal surface do not affect the load-bearing capacity under fatigue and survival rates of bonded monolithic fully-stabilized zirconia simplified restorations

[39] Fracture loads of screw-retained implant-supported zirconia prostheses after thermal and mechanical stress.

[40] Influence of residual thermal stresses on the edge chipping resistance of PFM and veneered zirconia structures: Experimental and FEA study

[41] Evaluation of stress distribution in bone and three-unit fixed implant-supported prostheses with zirconia and titanium abutments: A 3D finite element analysis

[42] Release of zirconia nanoparticles at the metal stem-bone cement interface in implant loosening of total hip replacements.

[43] EIS and noise study of zirconia-alumina- benzotriazole nano-composite coating applied on Al2024 by the sol-gel method

[44] Novel laser textured surface designs for improved zirconia implants performance.

[45] Phase field modeling of crack propagation in shape memory ceramics – Application to zirconia

[46] Strength and aging resistance of monolithic zirconia: an update to current knowledge

[47] Evaluation of the performance of zirconia-multiwalled carbon nanotube nanoheterostructures in adsorbing As(III) from potable water from the perspective of physical chemistry and chemical physics with a special emphasis on approximate site energy distribution

[48] Essential oils and zirconia dental implant materials.

[49] Inhibition of bacterial growth on zirconia abutment with a helium cold atmospheric plasma jet treatment.

[50] Nano-sulfated zirconia catalyzed biodiesel production from tannery waste sheep fat.

[51] Corrigendum to “Preparation and performance of thermal barrier coatings made of BNw-containing modified Nd<inf>2</inf>O<inf>3</inf>-doped yttria-stabilized zirconia” (Ceramics International (2020) 46(1) (500–507), (S0272884219325003), (10.1016/j.ceramint.2019.08.289))

[52] Glow Discharge Plasma Treatment on Zirconia Surface to Enhance Osteoblastic-Like Cell Differentiation and Antimicrobial Effects

[53] influence of the conditioning method for pre-sintered zirconia on the shear bond strength of bilayered porcelain/zirconia

[54] utilization of er:yag laser in retrieving and reusing of lithium disilicate and zirconia monolithic crowns in natural teeth: an in vitro study

[55] one-piece zirconia ceramic versus titanium implants in the jaw and femur of a sheep model: a pilot study

[56] synthesis of zirconia nanoparticles and their ameliorative roles as additives concrete structures

[57] novel coatings on zirconia for improved bonding with veneer ceramics

[58] a influência dos parâmetros de deposição na morfologia dos eletrólitos para células a combustível de óxido sólido, à base de filmes de zircônia: 8 mol% ítria depositados por spray pirólise

[59] dental adhesion enhancement on zirconia inspired by mussel’s priming strategy using catechol

[60] bonding between layering materials and zirconia frameworks

[61] an alumina toughened zirconia composite for dental implant application: in vivo animal results

[62] comparative study of shear bond strength of three veneering ceramics to a zirconia core

[63] investigation on effect of yttria stabilized zirconia coated piston crown on performance and emission characteristics of a diesel engine

[64] evaluation of surface microhardness of silver and zirconia reinforced glass-ionomers with and without microhydroxyapatite

[65] microstructural stability of spark-plasma-sintered wf/w composite with zirconia interface coating under high-heat-flux hydrogen beam irradiation

[66] Combined application of femtosecond laser and air-abrasion protocols to monolithic zirconia at different sintering stages: Effects on surface roughness and resin bond strength.

[67] synthesis and characterization of mcm-41-supported nano zirconia catalysts

[68] fabrication and characterization of nanoporous niobia, and nanotubular tantala, titania and zirconia via anodization

[69] vanadium supported on alumina and/or zirconia catalysts for the selective transformation of ethane and methanol

[70] electronic band structure variations in the ceria doped zirconia: a first principles study

[71] sulphated zirconia as an eco-friendly catalyst in acylal preparation under solvent-free conditions, acylal deprotection assisted by microwaves, and the synthesis of anhydro-dimers of o-hydroxybenzaldehydes

[72] influence of manganese on the sintering properties of tetragonal zirconia

[73] monoclinic zirconia sintered bodies prepared via two-step sintering and characterisation of selected mechanical properties

[74] effect of lithium disilicate reinforced liner treatment on bond and fracture strengths of bilayered zirconia all-ceramic crown

[75] evaluation of five primers and two opaque resins for bonding ceria-stabilized zirconia/alumina nanocomposite

[76] effect of zirconia on crystallization of yttrium aluminum garnet precursor gel fibers

[77] all-ceramic single crown restauration of zirconia oral implants and its influence on fracture resistance: an investigation in the artificial mouth

[78] effect of ultraviolet photofunctionalisation on the cell attractiveness of zirconia implant materials

[79] Hydrogen Production by Partial Oxidation Reforming of Methane over Ni Catalysts Supported on High and Low Surface Area Alumina and Zirconia

[80] Hydrogen Production by Partial Oxidation Reforming of Methane over Ni Catalysts Supported on High and Low Surface Area Alumina and Zirconia

[81] Ceramic Dusting Corrosion of Yttria-Stabilized Zirconia in Ultra High Temperature Reverse-Flow Pyrolysis Reactors