Materials (Basel, Switzerland)

ACS omega

[1] Wear Resistant Coatings with a High Friction Coefficient Produced by Plasma Electrolytic Oxidation of Al Alloys in Electrolytes with Basalt Mineral Powder Additions.

[2] Laser Surface Modification of Aluminium Alloy AlMg9 with BC Powder.

[3] enhancement in the tribological and mechanical properties of electroless nickel-nanodiamond coatings plated on iron

[4] coatings for transport industry

[5] wear of diamond-coated cutting tool inserts upon machining of al-12%si and glass fiber/polyester resin composites

[6] increasing the efficiency of the alloyed layer formation when hardening tungsten carbide with combined methods

[7] ion nitriding of titanium alloys with a hollow cathode effect application

[8] Preparation, mechanical properties and wear resistance of Ni–W/SiC nanocomposite coatings

[9] Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques

[10] Significantly enhanced wear resistance of PEEK by simply filling with modified graphitic carbon nitride

[11] Improvement of wear resistance in a pearlitic rail steel via quenching and partitioning processing.

[12] Increasing the Wear Resistance of Steel Couples by Selective Transport in Lubricating Oils.

[13] Improving the wear resistance of PTFE-based friction material used in ultrasonic motors by laser surface texturing

[14] On the Durability and Wear Resistance of Transparent Superhydrophobic Coatings

[15] Microstructures and wear resistance of boron-chromium duplex-alloyed coatings prepared by a two-step pack cementation process

[16] Effect of process parameters on microstructure and wear resistance of niobium carbide coatings produced by pack cementation

[17] Evaluation of hardness and wear resistance of interim restorative materials

[18] Role of ZrO<inf>2</inf> oxide layer on the fretting wear resistance of a nuclear fuel rod

[19] Multiphase steel with improved impact-abrasive wear resistance in comparison with conventional Hadfield steel

[20] Improvement in the abrasive wear resistance of an aluminum alloy casting for a continuously-variable transmission using heat treatment and pulsed anodizing

[21] the wear resistance of cr-c-al2o3 composite deposits prepared on a cu substrate using cr3+-based plating baths

[22] some studies on the wear resistance of artificial teeth in presence of amorphous sio2 and tio2 fillers estudos da resistência ao desgaste de dente artificial em presença de fillers amorfos sio2 e tio2

[23] electrochemical methods to improve the wear resistance of coating deposited on the metal surface

[24] Preparation, mechanical properties and wear resistance of Ni–W/SiC nanocomposite coatings