experimental parametric model for indirect adhesion wear measurement in the dry turning of uns a97075 (al-zn) alloy

Clicks: 202
ID: 181171
2017
Free PDF
Article Quality & Performance Metrics
Overall Quality Improving Quality
0.0 /100
Combines engagement data with AI-assessed academic quality
AI Quality Assessment
Not analyzed
Abstract
In this work, the study of the influence of cutting parameters (cutting speed, feed, and depth of cut) on the tool wear used in in the dry turning of cylindrical bars of the UNS A97075 (Al-Zn) alloy, has been analyzed. In addition, a study of the physicochemical mechanisms of the secondary adhesion wear has been carried out. The behavior of this alloy, from the point of view of tool wear, has been compared to similar aeronautical aluminum alloys, such as the UNS A92024 (Al-Cu) alloy and UNS A97050 (Al-Zn) alloy. Furthermore, a first approach to the measurement of the 2D surface of the adhered material on the rake face of the tool has been conducted. Finally, a parametric model has been developed from the experimental results. This model allows predicting the intensity of the secondary adhesion wear as a function of the cutting parameters applied.
Reference Key
trujillo2017materialsexperimental Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Francisco Javier Trujillo;Lorenzo Sevilla;Mariano Marcos
Journal Nature Materials
Year 2017
DOI
10.3390/ma10020152
URL
http://www.mdpi.com/1996-1944/10/2/152
Keywords
aluminum alloys electronics civil engineering (general)microscopydescriptive and experimental mechanics nuclear engineeringengineering (general) parametric modelstechnologyelectrical engineering

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.