[1] reduced subthreshold characteristics and flicker noise of an algaas/ingaas phemt using liquid phase deposited tio2 as a gate dielectric

[2] experimental ultrasound transmission through fluid-solid and air-solid phononic plates

[3] combined effects of non-conforming fly ash and recycled masonry aggregates on mortar properties

[4] acknowledgement to reviewers of materials in 2015

[5] effects of carbonization temperature and component ratio on electromagnetic interference shielding effectiveness of woodceramics

[6] new power mosfet with beyond-1d-limit <i>r</i>_sp-<i>bv</i> trade-off and superior reverse recovery characteristics

[7] synthesis and physical property characterisation of spheroidal and cuboidal nuclear waste simulant dispersions

[8] wavelength- or polarization-selective thermal infrared detectors for multi-color or polarimetric imaging using plasmonics and metamaterials

[9] investigation of high-energy ion-irradiated ma957 using synchrotron radiation under in-situ tension

[10] molecular beam-thermal desorption spectrometry (mb-tds) monitoring of hydrogen desorbed from storage fuel cell anodes

[11] toughening mechanisms in nanolayered max phase ceramics—a review

[12] integrated effects of two additives on the enhanced performance of ptb7:pc71bm polymer solar cells

[13] synthesis and study on ionic conductive (bi1−x,vx)o1.5−δ materials with a dual-phase microstructure

[14] the effect of zro2 nanoparticles on the microstructure and properties of sintered wc–bronze-based diamond composites

[15] mechanical and thermal dehydrogenation of the mechano-chemically synthesized calcium alanate (ca(alh4)2) and lithium chloride (licl) composite

[16] effects of the tempering and high-pressure torsion temperatures on microstructure of ferritic/martensitic steel grade 91

[17] preparation of extracellular matrix developed using porcine articular cartilage and in vitro feasibility study of porcine articular cartilage as an anti-adhesive film

[18] friction stir processing of particle reinforced composite materials

[19] fabrication and sintering behavior of er:srf2 transparent ceramics using chemically derived powder

[20] diseño de un sistema de adquisición de datos para variables meteorológicas

[21] theory-guided materials design of multi-phase ti-nb alloys with bone-matching elastic properties

[22] effects of interfaces on the structure and novel physical properties in epitaxial multiferroic bifeo3 ultrathin films

[23] stm, secpm, afm and electrochemistry on single crystalline surfaces

[24] aluminium electrodeposition from ionic liquid: effect of deposition temperature and sonication †

[25] improved tribological performance of amorphous carbon (a-c) coating by zro2 nanoparticles

[26] preparation and morphology studies of nano zinc oxide obtained using native and modified chitosans

[27] interacting effects induced by two neighboring pits considering relative position parameters and pit depth

[28] end-functionalized poly(n-isopropylacrylamide) with d-glucosamine through different initiator from c-1 and c-2 positions via atom transfer radical polymerization

[29] structural, morphological, optical and photocatalytic properties of y, n-doped and codoped tio2 thin films

[30] effect of the microstructure and distribution of the second phase on the stress corrosion cracking of biomedical mg-zn-zr-xsr alloys

[31] fabrication, structural characterization and uniaxial tensile properties of novel sintered multi-layer wire mesh porous plates

[32] tribological behavior and the mild–severe wear transition of mg97zn1y2 alloy with a lpso structure phase

[33] multi-scale modeling for predicting the stiffness and strength of hollow-structured metal foams with structural hierarchy

[34] 3-[bis(pyridin-2-ylmethyl)amino]-5-(4-carboxyphenyl)-bodipy as ratiometric fluorescent sensor for cu2+

[35] a new approach for the modification of paper surface properties using polyoxometalates

[36] compressive behavior of fiber-reinforced concrete with end-hooked steel fibers

[37] fabricating nanoporous silica structure on d-fibres through room temperature self-assembly

[38] voltammetric studies on gold electrodes coated with chitosan-containing layer-by-layer films

[39] welding and joining of titanium aluminides

[40] method of fatigue-life prediction for an asphalt mixture based on the plateau value of permanent deformation ratio

[41] pull-out strength and bond behavior of prestressing strands in prestressed self-consolidating concrete

[42] composite hydrogels for bone regeneration

[43] effects of strand lay direction and crossing angle on tribological behavior of winding hoist rope

[44] the influence of the interlayer distance on the performance of thermally reduced graphene oxide supercapacitors

[45] 1,7-bis-(n,n-dialkylamino)perylene bisimides: facile synthesis and characterization as near-infrared fluorescent dyes

[46] study of polydiacetylene-poly (ethylene oxide) electrospun fibers used as biosensors

[47] room temperature co-precipitation synthesis of magnetite nanoparticles in a large ph window with different bases

[48] field performance of recycled plastic foundation for pipeline

[49] weathering characteristics of wood plastic composites reinforced with extracted or delignified wood flour

[50] biosynthesis and characterization of agnps–silk/pva film for potential packaging application

[51] massive transformation in titanium-silver alloys and its effect on their mechanical properties and corrosion behavior

[52] preparation, surface and pore structure of high surface area activated carbon fibers from bamboo by steam activation

[53] structure and transport properties of dense polycrystalline clathrate-ii (k,ba)16(ga,sn)136 synthesized by a new approach employing sps

[54] optimizing and characterizing geopolymers from ternary blend of philippine coal fly ash, coal bottom ash and rice hull ash

[55] effect of carbon in fabrication al-sic nanocomposites for tribological application

[56] nanocomposite electrospun nanofiber membranes for environmental remediation

[57] characterization of high-k nanolayers by grazing incidence x-ray spectrometry

[58] high temperature deformation mechanisms in a dld nickel superalloy

[59] influence of inherent surface and internal defects on mechanical properties of additively manufactured ti6al4v alloy: comparison between selective laser melting and electron beam melting

[60] surface chemistry in nanoscale materials

[61] experimental parametric model for indirect adhesion wear measurement in the dry turning of uns a97075 (al-zn) alloy

[62] hdpe/chitosan blends modified with organobentonite synthesized with quaternary ammonium salt impregnated chitosan

[63] hydroisomerization of n-butane over platinum-promoted cesium hydrogen salt of 12-tungstophosphoric acid

[64] liquid crystal microlenses for autostereoscopic displays

[65] electrophoretic deposition of chitosan/h-bn and chitosan/h-bn/tio2 composite coatings on stainless steel (316l) substrates

[66] simulation study on jet formability and damage characteristics of a low-density material liner

[67] magnetization dynamics of amorphous ribbons and wires studied by inductance spectroscopy

[68] evaluation of fracture strength of ceramics containing small surface defects introduced by focused ion beam

[69] hybrid organic/inorganic nanocomposites for photovoltaic cells

[70] surface treatment of peot/pbt (55/45) with a dielectric barrier discharge in air, helium, argon and nitrogen at medium pressure

[71] integrating microtissues in nanofiber scaffolds for regenerative nanomedicine

[72] rapid prototyping of slot die devices for roll to roll production of el fibers

[73] preparation and characterization of flexible substrate material from phenyl-thiophene-2-carbaldehyde compound

[74] comparative effect of self- or dual-curing on polymerization kinetics and mechanical properties in a novel, dental-resin-based composite with alkaline filler. running title: resin-composites with alkaline fillers

[75] a review of natural joint systems and numerical investigation of bio-inspired gfrp-to-steel joints

[76] creep-fatigue failure diagnosis

[77] the surface of nanoparticle silicon as studied by solid-state nmr

[78] versatility of evaporation-induced self-assembly (eisa) method for preparation of mesoporous tio2 for energy and environmental applications

[79] effect of co-production of renewable biomaterials on the performance of asphalt binder in macro and micro perspectives

[80] gelatin-based hydrogels promote chondrogenic differentiation of human adipose tissue-derived mesenchymal stem cells in vitro

[81] adsorption behavior of selective recognition functionalized biochar to cd(ii) in wastewater

[82] regulación de la temperatura del vapor sobrecalentado en un generador de vapor bkz-340-140-29m de 100 mw mediante un control pid 2-gdl y filtraje de la medida

[83] laser machining and in vitro assessment of wollastonite-tricalcium phosphate eutectic glasses and glass-ceramics

[84] electrical properties of czo films prepared by ultrasonic spray pyrolysis

[85] study of thermal electrical modified etching for glass and its application in structure etching

[86] irradiation induced microstructure evolution in nanostructured materials: a review

[87] generation of well-defined micro/nanoparticles via advanced manufacturing techniques for therapeutic delivery

[88] immobilization of methyltrioxorhenium on mesoporous aluminosilicate materials

[89] optical third harmonic generation using nickel nanostructure-covered microcube structures

[90] theoretical research on thermal shock resistance of ultra-high temperature ceramics focusing on the adjustment of stress reduction factor

[91] a route for polymer nanocomposites with engineered electrical conductivity and percolation threshold

[92] process design of aluminum tailor heat treated blanks

[93] stresses and displacements in functionally graded materials of semi-infinite extent induced by rectangular loadings

[94] effects of cracking test conditions on estimation uncertainty for weibull parameters considering time-dependent censoring interval

[95] a novel porcine graft for regeneration of bone defects

[96] influence of sulfate-reducing bacteria on the corrosion residual strength of an az91d magnesium alloy

[97] investigation of the high mobility igzo thin films by using co-sputtering method

[98] non-destructive inspection of impact damage in composite aircraft panels by ultrasonic guided waves and statistical processing

[99] development of composite pcms by incorporation of paraffin into various building materials

[100] cellulose nanocrystal membranes as excipients for drug delivery systems

[101] effects of electrodes on the switching behavior of strontium titanate nickelate resistive random access memory