Materials (Basel, Switzerland)

Journal of the mechanical behavior of biomedical materials

[1] Formation Mechanism of Aluminide Diffusion Coatings on Ti and Ti-6Al-4V Alloy at the Early Stages of Deposition by Pack Cementation.

[2] The Effects of Post Heat Treatment on the Microstructural and Mechanical Properties of an Additive-Manufactured Porous Titanium Alloy.

[3] effect of alkyl chain length on carboxylic acid sams on ti-6al-4v

[4] effect of electrical discharge machining on stress concentration in titanium alloy holes

[5] Fretting corrosion behaviour of Ti-6Al-4V reinforced with zirconia in foetal bovine serum.

[6] Investigation into using resonant frequency measurements to predict the mechanical properties of Ti-6Al-4V manufactured by selective laser melting

[7] Investigation of molding and sintering parameters of feedstock prepared from Ti-6Al-4V alloy powder

[8] Formation Mechanism of Aluminide Diffusion Coatings on Ti and Ti-6Al-4V Alloy at the Early Stages of Deposition by Pack Cementation.

[9] Heat-treatment effects on mechanical properties and microstructure evolution of Ti-6Al-4V alloy fabricated by laser powder bed fusion

[10] LENS Ti-6Al-4V alloy material properties determination for LS-Dyna package

[11] Microstructural Modeling and Strengthening Mechanism of TiB/Ti-6Al-4V Discontinuously-Reinforced Titanium Matrix Composite

[12] Effect of boron on the microstructure and mechanical properties of Ti-6Al-4V produced by laser directed energy deposition after heat treatment

[13] Electrochemical corrosion behavior of nano-coated Ti-6Al-4V alloy by a novel chitosan nanoparticles /silver nanoparticles in artificial saliva solution

[14] Effect of Ultrasonic Surface Impact on the Fatigue Behavior of Ti-6Al-4V Subject to Simulated Body Fluid

[15] Optimal machining conditions for turning Ti-6Al-4V using response surface methodology

[16] dynamic shear deformation and failure of ti-6al-4v and ti-5al-5mo-5v-1cr-1fe alloys

[17] the diameter of nanotubes formed on ti-6al-4v alloy controls the adhesion and differentiation of saos-2 cells

[18] microstructure and wear properties of electron beam melted ti-6al-4v parts: a comparison study against as-cast form

[19] evaluation of surface characteristics of ti-6al-4v and tilite alloys used for implant abutments avaliação das características de superfície das ligas de ti-6al-4v e tilite usadas para "abutments" de implantes

[20] study on modified water glass used in high temperature protective glass coating for ti-6al-4v titanium alloy

[21] measurement of residual stresses and toughness in ti-6al-4v material produced by laser beam manufacturing

[22] laser engineering net shaping (lenstm) of micro-porous ti-6al-4v filters

[23] effect of alkyl chain length on carboxylic acid sams on ti-6al-4v

[24] Brazing of Ti-6Al-4V with a copper-based brazing filler metal - Welding in the World