Inorganic chemistry

ChemSusChem

Biomacromolecules

mugla journal of science and technology

[1] A COMPUTATIONALLY EFFICIENT ENERGY MANAGEMENT STRATEGY FOR A PLUG-IN FUEL-CELL HYBRID ELECTRIC VEHICLE COMPOSED OF A MULTI-INPUT CONVERTER

[2] Sodium ion capacitors: materials, mechanism and challenges.

[3] Effect of Sugars on the Real-Time Adsorption of Expansin on Cellulose.

[4] Oxygen-Vacancy-Enhanced Peroxidase-like Activity of Reduced CoO Nanocomposites for the Colorimetric Detection of HO and Glucose.

[5] Heteronuclear Iron(III)-Schiff Base Complexes with the Hexacyanidocobaltate(III) Anion: On the Quest To Understand the Governing Factors of Spin Crossover.

[6] polymethylmethacrylate/polyacrylonitrile membranes via centrifugal spinning as separator in li-ion batteries

[7] energy management system optimization for battery-ultracapacitor powered electric vehicle

[8] the possibility of increasing the antioxidant activity of celery root during osmotic treatment

[9] a four-phase high voltage conversion ratio bidirectional dc-dc converter for battery applications

[10] dynamic economic dispatch pada sistem kelistrikan microgrid dengan penambahan media penyimpan energi menggunakan quadratic programming

[11] optimization of hybrid energy storage systems at the building level with combined heat and power generation

[12] exploring water level sensitivity for metropolitan new york during sandy (2012) using ensemble storm surge simulations

[13] evisceration caused by the explosion of mobile phone battery: a rare form of domestic accident in a child

[14] a review on battery charging and discharging control strategies: application to renewable energy systems

[15] dynamic control modeling and simulation of a upfc–smes compensator in power systems

[16] Harnessing self-heating in nanowires for energy efficient, fully autonomous and ultra-fast gas sensors

[17] Calculation of Capacity and Usage Time of Lithium-Ion Batteries on Electric Bikes with 350 W BLDC Motors

[18] Ability of the Short Physical Performance Battery Frailty Index to Predict Mortality and Hospital Readmission in Patients with Liver Cirrhosis

[19] Effect of Current Rate and Prior Cycling on the Coulombic Efficiency of a Lithium-Ion Battery

[20] Optimal operation of Distributed Network embedded to wind – Battery storage system for revenue enhancement

[21] A Review on Optimal Operation of Distributed Network Embedded to Wind-Battery Storage System

[22] Customer economics of residential PV–battery systems in Thailand

[23] Co<inf>3</inf>O<inf>4</inf> modified Ag/g-C<inf>3</inf>N<inf>4</inf> composite as a bifunctional cathode for lithium-oxygen battery

[24] The Li-ion rechargeable battery: a perspective.

[25] A novel estimation method for the state of health of lithium-ion battery using prior knowledge-based neural network and markov chain

[26] Portable Battery Power and Small-Reservoir Modifications For Pesticide Misting Systems.

[27] Comparative analysis of toxicity reduction of wastewater in twelve industrial park wastewater treatment plants based on battery of toxicity assays

[28] Assessment of Eight Entrepreneurial Personality Dimensions: Validity Evidence of the BEPE Battery.

[29] Reliability assessments of an islanded hybrid PV-diesel-battery system for a typical rural community in Nigeria.

[30] MPC based control strategy for battery energy storage station in a grid with high photovoltaic power penetration

[31] Reference values for fatigued versus non-fatigued limb symmetry index measured by a newly designed single-leg hop test battery in healthy subjects: a pilot study.

[32] Distributed TABC based bi-directional converter for cell/sub-modular level battery energy storage system

[33] Temperament assessment battery for children (TABC)

[34] Lithium-ion battery models: a comparative study and a model-based powerline communication

[35] Diagnosis of a battery energy storage system based on principal component analysis

[36] Energy management system for hybrid PV-wind-battery microgrid using convex programming, model predictive and rolling horizon predictive control with experimental validation

[37] Assessment of primary frequency control through battery energy storage systems

[38] Battery energy storage sizing based on a model predictive control strategy with operational constraints to smooth the wind power

[39] A Back-End Method Realizing the Ergonomic Advantage of Modularized Battery Systems: ICT Equipment, Electric Vehicles and Beyond

[40] In situ coupled amorphous cobalt nitride with nitrogen-doped graphene aerogel as a trifunctional electrocatalyst towards Zn-air battery deriven full water splitting

[41] Facile preparation of sulfur/nitrogen co-doped graphene coupled with Ni(OH)<inf>2</inf> for battery-type electrode with superior electrochemical performance

[42] CoMn2O4 nanoparticles anchored on nitrogen-doped graphene nanosheets as bifunctional electrocatalyst for rechargeable zinc–air battery

[43] An IPT Battery Charger with Near Unity Power Factor and Load-Independent Constant Output Combating Design Constraints of Input Voltage and Transformer Parameters

[44] Design and test of a new two-stage control scheme for SMES-battery hybrid energy storage systems for microgrid applications

[45] System design of underwater battery power system for marine and offshore industry

[46] In Situ Synthesis of Silicon-Carbon Composites and Application as Lithium-Ion Battery Anode Materials.

[47] Flower-Like MoSe/MoO Composite with High Capacity and Long-Term Stability for Lithium-Ion Battery.

[48] The role of functional materials to produce high areal capacity lithium sulfur battery

[49] Lithium-ion battery pack equalization based on charging voltage curves

[50] Optimized charging of lithium-ion battery for electric vehicles: Adaptive multistage constant current–constant voltage charging strategy

[51] Design of multishell microsphere of transition metal oxides/carbon composites for lithium ion battery

[52] Josh's Battery – a more even relationship with the grid★

[53] Surface Charge Modulation of Perovskite Oxides at the Crystalline Junction with Layered Double Hydroxide for a Durable Rechargeable Zinc-Air Battery.

[54] Stand-Alone Battery Thermal Management for Fast Charging of Electric Two Wheelers—Integrated Busbar Cooling

[55] Diagnostic value of digital clock drawing test in comparison with CERAD neuropsychological battery total score for discrimination of patients in the early course of Alzheimer’s disease from healthy individuals

[56] Synergistic Role of Electrolyte and Binder for Enhanced Electrochemical Storage for Sodium-Ion Battery

[57] Tailoring Low Temperature Performance of Lithium-ion Battery via Rational Designing Interphase on Anode.

[58] Fe3SnC@CNF: A 3D Antiperovskite Intermetallic Carbide System as a New Robust High Capacity Li-ion Battery Anode.

[59] Sulfur-Grafted Hollow Carbon Spheres for Potassium-Ion Battery Anodes.

[60] Hydrothermal Coating of Patterned Carbon Nanotube Forest for Structured Lithium-Ion Battery Electrodes.

[61] The Work Disability Functional Assessment Battery (WD-FAB).

[62] The effect of heterogeneous electric vehicles with different battery capacities in parking lots on peak load of electric power distribution networks

[63] Largely Improved Battery Performance Using a Microsized Silicon Skeleton Caged by Polypyrrole as Anode.

[64] Can product bundling increase the joint adoption of electric vehicles, solar panels and battery storage? Explorative evidence from a choice-based conjoint study in Austria

[65] Finding Global-Optimal Gearbox Designs for Battery Electric Vehicles

[66] Energy Management Strategy for Micro-Grids with PV-Battery Systems and Electric Vehicles

[67] Template-free synthesis of metallic WS hollow microspheres as an anode for the sodium-ion battery.

[68] Large-scale synthesis of Ni(OH)/peach gum derived carbon nanosheet composites with high energy and power density for battery-type supercapacitor.

[69] NIH Toolbox Cognition Battery in Young and Older Adults: Reliability and Relationship to Adiposity and Physical Activity.

[70] Detailed Li-ion battery characterization model for economic operation

[71] Research on Automatic Matching Model of Power Battery

[72] Preparing a composite including SnS<inf>2</inf>, carbon nanotubes and S and using as cathode material of lithium-sulfur battery

[73] Dendrite-Free Zinc Deposition Induced by Tin-Modified Multifunctional 3D Host for Stable Zinc-Based Flow Battery.

[74] The adoption of Internet of Things in a Circular Supply Chain framework for the recovery of WEEE: The case of Lithium-ion electric vehicle battery packs.

[75] The adoption of Internet of Things in a Circular Supply Chain framework for the recovery of WEEE: The case of Lithium-ion electric vehicle battery packs

[76] Thermal and chemical burns caused by e-cigarette battery explosions.

[77] Hybrid thermal management of a Li-ion battery module with phase change material and cooling water pipes: An experimental investigation

[78] A novel heat pipe assisted separation type battery thermal management system based on phase change material

[79] Comparative study of GaN betavoltaic battery based on p-n junction and Schottky barrier diode

[80] [Impact of Newly Build Lead-Acid Battery Agglomeration Area on the Surrounding Soil Environment: A Study Based on the Spatial Characteristics of Heavy Metals].

[81] Electrophoretic Deposition for Lithium-Ion Battery Electrode Manufacture.

[82] Microwave-absorbing properties of cathode material during reduction roasting for spent lithium-ion battery recycling

[83] Atomic layer deposition (ALD) of lithium fluoride (LiF) protective film on Li-ion battery LiMn<inf>1.5</inf>Ni<inf>0.5</inf>O<inf>4</inf> cathode powder material

[84] Electrochemical properties of pre-lithiated nanorod-like Li<inf>x</inf>V<inf>6</inf>O<inf>13</inf> lithium ion battery cathode materials prepared by solvothermal method

[85] LiCoO<inf>2</inf>@LiNi<inf>0.45</inf>Al<inf>0.05</inf>Mn<inf>0.5</inf>O<inf>2</inf> as high-voltage lithium-ion battery cathode materials with improved cycling performance and thermal stability

[86] Large-Scale Modification of Commercial Copper Foil with Lithiophilic Metal Layer for Li Metal Battery.

[87] Multi-objective energy management in microgrids with hybrid energy sources and battery energy storage systems

[88] Lithium-Battery Anode Gains Additional Functionality for Neuromorphic Computing through Metal-Insulator Phase Separation.

[89] Experimental and simulation study on thermal characteristics of 18,650 lithium–iron–phosphate battery with and without spot–welding tabs

[90] Short Physical Performance Battery: What Does Each Sub-Test Measure in Patients with Chronic Obstructive Pulmonary Disease?

[91] WISC-IV profile in Developmental Dyscalculia and relationship between WISC-IV and Battery for Developmental Dyscalculia (BDE) in a clinical sample of children with learning difficulties of specific learning disabilities

[92] Sustainable business model archetypes for the electric vehicle battery second use industry: Towards a conceptual framework

[93] Recycling spent lithium-ion battery as adsorbents to remove aqueous heavy metals: Adsorption kinetics, isotherms, and regeneration assessment

[94] Industrial Policy: Battery Cells from Europe?

[95] An adaptive sigma-point Kalman filter with state equality constraints for online state-of-charge estimation of a Li(NiMnCo)O<inf>2</inf>/Carbon battery using a reduced-order electrochemical model

[96] Magnetic supramolecular polymer: Ultrahigh and highly selective Pb(II) capture from aqueous solution and battery wastewater.

[97] Validity and reliability of the Neuropsychological Assessment Battery - Screening Module (S-NAB) in a subset of Malaysian population with mild traumatic brain injury (mTBI).

[98] Annealing effects of TiO<inf>2</inf> coating on cycling performance of Ni-rich cathode material LiNi<inf>0.8</inf>Co<inf>0.1</inf>Mn<inf>0.1</inf>O<inf>2</inf> for lithium-ion battery

[99] A 1.02 μW Battery-Less, Continuous Sensing and Post-Processing SiP for Wearable Applications.

[100] A Bioinspired Functionalization of Polypropylene Separator for Lithium-Sulfur Battery.

[101] A Stimulus-Responsive Zinc-Iodine Battery with Smart Overcharge Self-Protection Function.