Materials (Basel, Switzerland)

Journal of environmental management

waste management (new york, ny)

[1] Wear Mechanisms and Wear Model of Carbide Tools during Dry Drilling of CFRP/TiAl6V4 Stacks.

[2] Analysis of the Machinability of Carbon Fiber Composite Materials in Function of Tool Wear and Cutting Parameters Using the Artificial Neural Network Approach.

[3] Research on Finite Element Model Modification of Carbon Fiber Reinforced Plastic (CFRP) Laminated Structures Based on Correlation Analysis and an Approximate Model.

[4] Assessment of Standards and Codes Dedicated to CFRP Confinement of RC Columns.

[5] A multi-period optimisation approach for deployment and optimal design of an aerospace CFRP waste management supply chain.

[6] Reliability Analysis of CFRP-Strengthened RC Bridges Considering Size Effect of CFRP.

[7] Fast recovery process of carbon fibers from waste carbon fibers-reinforced thermoset plastics.

[8] Debonding Detection and Monitoring for CFRP Reinforced Concrete Beams Using Pizeoceramic Sensors.

[9] Does the Carbon Fibre Coating Reinforcement Have an Influence on the Bearing Capacity of High-Performance Self-Compacting Fibre-Reinforced Concrete?

[10] Study on the Flexural Performance of Hybrid-Reinforced Concrete Beams with a New Cathodic Protection System Subjected to Corrosion.

[11] Influence of Cutting Parameters on the Surface Quality of Two-Layer Sandwich Structures

[12] future view of structural capacitor with laminated cfrp

[13] stress state analysis and failure mechanisms of masonry columns reinforced with frp under concentric compressive load

[14] numerical and experimental investigation of hollow steel columns strengthened with carbon fiber reinforced polymer

[15] Marine Application of Fiber Reinforced Composites: A Review

[16] Structural health monitoring for woven fabric CFRP laminates

[17] Wire Ropes and CFRP Strips to Provide Masonry Walls with Out-Of-Plane Strengthening.

[18] Repair of Block Masonry Panels with CFRP Sheets.

[19] Mode-I Fracture Behavior of CFRPs: Numerical Model of the Experimental Results.

[20] Simulation of Delamination Growth at CFRP-Tungsten Aerospace Laminates Using VCCT and CZM Modelling Techniques

[21] Experimental and numerical characterization of Mode I fracture in unidirectional CFRP laminated composite using XIGA-CZM approach

[22] Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM

[23] Numerical–Experimental Correlation of Impact-Induced Damages in CFRP Laminates

[24] Influence of elevated temperatures on epoxy adhesive used in CFRP strengthening systems for civil engineering applications

[25] Residual flexural properties of CFRP sandwich structures with aluminum honeycomb cores after low-velocity impact

[26] Transverse Static and Low-Velocity Impact Behavior of CFRP Wires under Pretension

[27] Wear Mechanisms and Wear Model of Carbide Tools during Dry Drilling of CFRP/TiAl6V4 Stacks.

[28] Research on Finite Element Model Modification of Carbon Fiber Reinforced Plastic (CFRP) Laminated Structures Based on Correlation Analysis and an Approximate Model.

[29] Assessment of Standards and Codes Dedicated to CFRP Confinement of RC Columns.

[30] A multi-period optimisation approach for deployment and optimal design of an aerospace CFRP waste management supply chain.

[31] The Durability of an Organic-Inorganic Sol-Gel Interlayer in Al-GFRP-CFRP Laminates in a Saline Environment.

[32] Reliability Analysis of CFRP-Strengthened RC Bridges Considering Size Effect of CFRP.

[33] Design of Lightweight CFRP Automotive Part as an Alternative for Steel Part by Thickness and Lay-Up Optimization.

[34] Debonding Detection and Monitoring for CFRP Reinforced Concrete Beams Using Pizeoceramic Sensors.

[35] Multi-margin drill structure for improving hole quality and dimensional consistency in drilling Ti/CFRP stacks

[36] Compressive behavior of UHPC confined by both spiral stirrups and carbon fiber-reinforced polymer (CFRP)

[37] A comparative analysis of driving force models for fatigue crack propagation of CFRP-reinforced steel structure

[38] CFRP Rod Panel Retrofit of Impact Damaged RC Bridge Girders

[39] Fatigue Design Criteria for Adhesively Bonded Anchorage for CFRP Tendon

[40] Fatigue life prediction of CFRP laminate under quasi-random loading

[41] Very high-cycle fatigue characteristics of cross-ply CFRP laminates in transverse crack initiation

[42] Crack based bond strength model of externally bonded steel plate and CFRP laminate to predict debonding failure of shear strengthened RC beams

[43] Fire Situation in Case of RC Members by Sika CFRP Strengthening

[44] Calculation of Reinforced Concrete Columns Strengthened by CFRP

[45] Development of Strip Anchoring for CFRP Strengthening System

[46] The effect of carbon fiber reinforced polymer (CFRP) micro drilling parameter on hole accuracy

[47] Physical Behavior of CFRP Retrofitted Reinforced Concrete Slab-Column Connections

[48] Fire Performance of CFRP Strengthened Steel I Beams Cured at Elevated Temperature

[49] Experimental Study on the Stiffness Evolution and Residual Strength of a Pre-damaged Structural Component Made from SMC CFRP Material

[50] Effect of vapour-grown carbon nanofibres on thermo-mechanical properties of high-functionality based resin used in CFRP strengthening system subjected severe service conditions

[51] Durability of CFRP strands used for prestressing of concrete structural members

[52] Effect of internal moisture content and dynamic mechanical analysis testing conditions on the T<inf>g</inf> values of CFRP tendons

[53] Fatigue strengthening of steel structures using high modulus CFRP plates: Development of a life-cycle analysis approach

[54] Hygrothermal conditioning of wet-layup CFRP-concrete adhesive joints modified with silane coupling agent and core-shell rubber nanoparticles

[55] Truss modeling of as-built and CFRP-repaired RC bridge columns subjected to combined cyclic lateral loading and torsion

[56] On the damage mechanism of high-speed ballast impact and compression after impact for CFRP laminates

[57] Effect of thermal cycling on the degradation of adhesively bonded CFRP/aluminum alloy joints for automobiles

[58] NaOH etching and resin pre-coating treatments for stronger adhesive bonding between CFRP and aluminium alloy

[59] Size Effect in RC T-Beams Strengthened in Shear with Externally Bonded CFRP Sheets: Experimental Study

[60] Analytical and Experimental Study of Residual Stresses in CFRP

[61] WPŁYW SUBSTYTUCJI WŁÓKIEN BAZALTOWYCH PRZEZ WŁÓKNA WĘGLOWE NA WŁAŚCIWOŚCI MECHANICZNE PRĘTÓW B/CFRP (HFRP)

[62] Experimental investigation of strengthening slab-column connections with CFRP fan

[63] Effect of Eccentricity of Load on Critical Force of Thin-Walled Columns CFRP

[64] Bond-slip behavior between fiber reinforced concrete and CFRP composites

[65] Numerical Analysis of Effectiveness of Strengthening Concrete Slab in Tension of the Steel-Concrete Composite Beam Using Pretensioned CFRP Strips

[66] Load-bearing capacity of compressed concrete elements subjected to repeated load strengthened with CFRP materials

[67] Fatigue behavior of concrete beams reinforced with glass- and carbon-fiber reinforced polymer (GFRP/CFRP) bars after exposure to elevated temperatures

[68] Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review

[69] Strengthening of Precast RC Frame to Mitigate Progressive Collapse by Externally Bonded CFRP Sheets Anchored with HFRP Anchors

[70] Cost and Ductility Effectiveness of Concrete Columns Strengthened with CFRP and SFRP Sheets

[71] Determination of Natural Frequency for CFRP Composite Satellite Antenna Reflector using Vibration Analysis

[72] Theoretical study on the efficiency of utilization of nanoclay-CFRP composite materials in the root area of wind turbine blades

[73] Experimental study on behavior of steel channel strengthened with CFRP

[74] A Continuum Damage Model for Intralaminar Progressive Failure Analysis of CFRP Laminates Based on the Modified Puck's Theory.

[75] Multi-period optimal design of an aerospace CFRP waste management supply chain: Data set, variables and criteria for the development of a multi-objective MILP model.

[76] Impact of the Fourth Industrial Revolution to Complex Aerospace "cFRP/Ti Drilling Applications" in Conjunction with Advanced Cutting Tool Design and Electric ADU's

[77] Relationship Between Matrix Cracking and Delamination in CFRP Cross-Ply Laminates Subjected to Low Velocity Impact.

[78] Suppression of shrinkage porosity in laser-joining of CFRP and steel using a laser surface modification process “Surfi-Sculpt ®”

[79] Compressive performance of square and low-strength concrete columns retrofitted with externally-bonded CFRP

[80] Stress intensity factor and fatigue analysis of cracked cruciform welded joints strengthened by CFRP sheets considering the welding residual stress

[81] Milling of an Al/CFRP Sandwich Construction with Non-Coated and TiAlN-Coated Tools

[82] Multiple Sensor Monitoring of CFRP Drilling to Define Cutting Parameters Sensitivity on Surface Roughness, Cylindricity and Diameter

[83] experimental and numerical research on seismic performance of earthquake-damaged rc frame strengthened with cfrp sheets

[84] rc columns strengthened with novel cfrp systems: an experimental study

[85] inclusion of cfrp-epoxy composite for end anchorage in nsm-epoxy strengthened beams

[86] assessing the contribution of the cfrp strip of bearing the applied load using near-surface mounted strengthening technique with innovative high-strength self-compacting cementitious adhesive (ihssc-ca)

[87] modèle de confinement pour les colonnes de section circulaire en béton armé confiné avec des enveloppes en polymère renforcé de fibres de carbone confinement model for circular rc columns wrapped with cfrp composite

[88] future view of structural capacitor with laminated cfrp

[89] fatigue crack propagation behavior of rc beams strengthened with cfrp under high temperature and high humidity environment

[90] analysis of cfrp joints by means of t-pull mechanical test and ultrasonic defects detection

[91] bond strength of composite cfrp reinforcing bars in timber

[92] strengthening of self-compacting reinforced concrete deep beams containing circular openings with cfrp

[93] Augmentation of the Delamination Factor in Drilling of Carbon Fibre-Reinforced Polymer Composites (CFRP).

[94] Effect of tool geometry on surface roughness in slotting of CFRP

[95] Optimization of Process Parameters in CFRP Machining with Diamond Abrasive Cutters