speed controlled belt conveyors: drives and mechanical considerations
Clicks: 190
ID: 159715
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
190 views
45 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #74 of 91 articles by views in JMIR mHealth and uHealth
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The paper presents variable speed belt conveyor system where the reference speed is changed in order
to achieve improved energy efficiency of operation. The recorded measurements show that belt tension
varies within the same limits as under constant speed operation. These results introduce a new insight
of the present state of the art in variable speed belt conveyor drives. The system is realized with
remote control from the control center on an open pit mine. The structure of the multi-motor drive
system of a single conveyor, as well as of the network-based control system distributed among belt
conveyor stations and the control center are shown. Speed control of a belt conveyor system is
organized to provide better utilization of the available material cross section on the belt and
reduced electrical energy consumption of the drive. The experimental results obtained on the
system prove that, under existing constraints, the applied algorithm has not introduced additional
stress to the belt or mechanical assemblies during acceleration and deceleration processes,
while providing higher energy efficiency of operation.
| Reference Key |
z.2018advancesspeed
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;BEBIC, M. Z.;RISTIC, L. B. |
| Journal | JMIR mHealth and uHealth |
| Year | 2018 |
| DOI |
10.4316/AECE.2018.01007
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.