Self-Powered UV-Near Infrared Photodetector Based on Reduced Graphene Oxide/n-Si Vertical Heterojunction.
Clicks: 482
ID: 95143
2016
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Steady Performance
30.0
/100
479 views
29 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
A novel self-powered photodetector based on reduced graphene oxide (rGO)/n-Si p-n vertical heterojunction with high sensitivity and fast response time is presented. The photodetector contains a p-n vertical heterojunction between a drop-casted rGO thin film and n-Si. Contacts between the semiconductor layer (rGO, n-Si) and source-drain Ti/Au electrodes allow efficient transfer of photogenerated charge carriers. The self-powered UV-near infrared photodetector shows high sensitivity toward a spectrum of light from 365 to 1200 nm. Under the 600 nm illumination (0.81 mW cm ), the device has a photoresponsivity of 1.52 A W , with fast response and recover time (2 ms and 3.7 ms), and the ON/OFF ratios exceed 10 when the power density reaches ≈2.5 mW cm . The high photoresponse primarily arises from the built-in electric field formed at the interface of n-Si and rGO film. The effect of rGO thickness, rGO reduction level, and layout of rGO/n-Si effective contact area on device performance are also systematically investigated.
| Reference Key |
li2016selfpoweredsmall
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Li, Guanghui;Liu, Lin;Wu, Guan;Chen, Wei;Qin, Sujie;Wang, Yi;Zhang, Ting; |
| Journal | Small (Weinheim an der Bergstrasse, Germany) |
| Year | 2016 |
| DOI |
10.1002/smll.201600835
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.