Rapid solidification of a FeSi intermetallic compound in undercooled melts: dendrite growth and microstructure transitions

Clicks: 194
ID: 84374
2020
Article Quality & Performance Metrics
Overall Quality Improving Quality
0.0 /100
Combines engagement data with AI-assessed academic quality
AI Quality Assessment
Not analyzed
Abstract
This work demonstrates a facile route to assemble MIL-53(Fe) by solvothermal method. Sulfate radical-based advanced oxidation processes (SR-AOPs) coupling with photocatalysis based on MIL-53(Fe) were investigated under visible light. The catalytic effect of MIL-53(Fe) for the degradation of tetracycline hydrochloride (TC-HCl) was systematically studied, as well as the reusability of the catalyst and the effect of operating parameters. The results indicated that 99.7 % of TC (300 mg/L) could be degraded within 80 min in the SR-AOPs coupling with photocatalysis processes, as compared to 71.4 % for the SR-AOPs and only 17.1 % for the photocatalysis. The trapping experiments and electron spin-resonance spectroscopy (ESR) showed the photogenerated electrons of MIL-53(Fe) under visible light irritation were trapped by persulfate to generated sulfate radicals which effectively suppressed the recombination of photogenerated carriers. And also, the SO could be formed by the conversion between Fe (Ⅲ) and Fe (Ⅱ) in MIL-53(Fe). Moreover, OH and O generated by the reaction increased significantly due to the increase of SO which generated more OH and reduced photogenerated carrier recombination respectively. Thus, the degradation efficiency of TC-HCl was improved. Furthermore, the degradation pathway for TC-HCl was proposed using the theoretical calculations and liquid chromatography coupled with mass spectrometry.
Reference Key
zhang2020rapidjournal Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Zhang, J.
Journal journal of materials science
Year 2020
DOI
10.1007/s10853-019-04265-2
URL
Keywords Keywords not found

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.