Effect of Ti Addition to Age Hardening Response of Al-10Zn-6MgxTi Alloy Produced by Squeeze Casting
Clicks: 339
ID: 45359
2018
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Popular Article
79.1
/100
336 views
274 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
This research focused on investigating the effects of Ti addition on the age hardening response of Al 7xxx alloy for Organic Rankine Cycle (ORC) turbine impeller application in power plant generators. Al-10Zn-6Mg wt. % alloys were produced by squeeze casting with 0.02, 0.05, and 0.25 wt. % Ti addition. As-cast samples were homogenized at 400 °C for 4 h. Solution treatment was conducted at 440 °C for 1 h, followed by quenching and ageing at 130 °C for 200 h. Age hardening result was observed using Rockwell B hardness measurement. Other characterizations included impact testing, STA, optical microscopy, and SEM-EDS. Results showed that the addition of Ti in all content variations increased the as-cast hardness due to the diminution of secondary dendrite arm spacing (SDAS) values of the alloy. Ageing at 130 °C strengthened the alloys, however the addition of Ti was not found to affect neither peak hardness nor impact values of the alloy. Identities of second phases formed during solidification were found to be T (Mg32(Al,Zn)49), β (Al8Mg5), and TiAl3, while precipitates produced during ageing were GP Zone, η′, and η (MgZn2).
| Reference Key |
ayu2018effectmatec
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Ayu, Nurcahyaningsih Dwi;Risly, Wijanarko;Irene, Angela;Bondan, Tiara Sofyan; |
| Journal | matec web of conferences |
| Year | 2018 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.