activated carbon (charcoal) obtaining . application
Clicks: 176
ID: 254475
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
176 views
28 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #22 of 39 articles by views in journal of traditional and complementary medicine
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The activated carbon is a microporous sorbent with a very large adsorption area that can reach in
some cases even 1500sqm / gram. Activated carbon is produced from any organic material with high carbon
content: coal, wood, peat or moor coal, coconut shells. The granular activated charcoal is most commonly
produced by grinding the raw material, adding a suitable binder to provide the desired hardness and shape.
Enabling coal is a complete process through which the raw material is fully exposed to temperatures between
600-900 degrees C, in the absence of oxygen, usually in a domestic atmosphere as gases such as nitrogen or
argon; as material that results from this process is exposed in an atmosphere of oxygen and steam at a
temperature in the interval from 600 - 1200 degrees C.
| Reference Key |
ciofu2015fiabilitateactivated
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Florin CIOFU |
| Journal | journal of traditional and complementary medicine |
| Year | 2015 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.