calculated radioactivity yields of cu-64 from proton-bombarded ni-64 targets using srim codes
Clicks: 176
ID: 250720
2014
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
176 views
33 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #20 of 23 articles by views in j am med assoc
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The End-Of-Bombardment (EOB) Yields from 64Ni(p,n)64Cu nuclear reaction have been calculated for optimizing irradiation parameters that correspond to future 64Cu radionuclide production using the BATAN’s 26.5-MeV cyclotron in Serpong. Enriched Ni target thickness, proton beam current and irradiation time which play significant role in the success of the Positron Emission Tomography (PET) radionuclide were also discussed in this paper. For a 26.5-MeV proton beam, the optimum target thickness for 64Cu production was nearly 1.5 mm with yields up to 560 mCi/µA.hr at the end of the irradiation. The comparisons with some selected experimental data indicated that the much-lower-than-expected EOB yields were mainly due to incorrect target thickness prepared for the irradiation. Nevertheless, these calculations were in good agreement with the previous predicted data with a maximum difference of less than 10%. The discrepancies were mostly due to different cross-section data employed in the calculations.
| Reference Key |
kambali2014atomcalculated
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;I. Kambali |
| Journal | j am med assoc |
| Year | 2014 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.