the mechanical properties of high carbon steel wires drawn in conventional and hydrodynamic dies
Clicks: 97
ID: 248558
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
28.8
/100
97 views
10 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #88 of 98 articles by views in journal of the formosan medical association = taiwan yi zhi
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
In the paper the influence of the hydrodynamic die on mechanical properties has been assessed. The drawing process of φ 5,5 mm wires to the final wire of φ 2,5 mm was conducted in 7 passes, in industrial conditions, by means of a modern Koch multi-die drawing machine. The drawing speed in the last passes was 8,2 m/s. On the basis of numerical analyses wire drawing process, the redundant strain of wires has been determined. In the case of the wires drawn with hydrodynamic dies the increase of plasticity properties have been noted. It has been shown that the increase of strength properties in wires drawn with conventional die is related to the occurrence in their bigger redundant strain.
| Reference Key |
suliga2013metalurgijathe
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;M. Suliga;R. Kruzel |
| Journal | journal of the formosan medical association = taiwan yi zhi |
| Year | 2013 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.