calibración de acelerómetros piezoeléctricos empleando un instrumento virtual. // calibration of piezoelectric accelerometers by using a virtual instrument.
Article Quality & Performance Metrics
Readership in this journal
EmergingRanked #30 of 76 articles by views in bmc musculoskeletal disorders
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
Abstract
La medición de los niveles de vibraciones en maquinarias y estructuras requiere el empleo de una instrumentación
adecuada, dentro de la cual tiene un inobjetable protagonismo el captador utilizado como elemento sensor primario. Esto
hace que la calidad de la medición esté significativamente vinculada a la dependencia de la relación de la magnitud a medir
y la señal eléctrica producida por el propio captador, así como el comportamiento de éste ante el contenido de frecuencias
de la vibración. El presente trabajo muestra la implementación automatizada, a través del análisis FFT, de un procedimiento
para la calibración de acelerómetros piezoeléctricos a partir de suministrarle a éstos una excitación de tipo aleatoria.
Palabras claves: Calibración de acelerómetros, medición de vibraciones, respuesta de frecuencias,
sensibilidad.
____________________________________________________________________
Summary
Vibration level measurements in machineries and structures require an appropriate instrumentation, being very
important the transducer used as primary sensor element. The quality of the measurement is significantly linked to the
dependence of the relationship between the magnitude to measure and the electric output produced by the transducer, as
well as the behaviour of this device to the content of frequencies of the vibration. The pres ent work shows the automated
implementation, through the FFT analysis, of a procedure in order to calibrate piezoelectric accelerometers submitting
them to random excitation forces.
Key words: calibration of accelerometers, vibration measurements, frequency response, sensitivity
| Reference Key |
gmez2001ingenieracalibracin
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;J. Cabrera Gómez;E. Palomino Marín |
| Journal | bmc musculoskeletal disorders |
| Year | 2001 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.