the tension strength experiment of thread connection based on the depth of thread penetration
Clicks: 187
ID: 242995
2008
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
4.8
/100
16 views
16 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
Thread connection has been used for a long time. Presently, this kind of connection is the main connection in steel construction. This research aims to comprehend further the mechanism of the thread connection with respect to the depth of thread penetration. Tensile strength of thread connection was derived experimentally using two steel rods. The diameter of the first steel rod was ¾ inch (18.5 mm) and threaded on one end by 16 threads per inch. The diameter of the second steel rod was 45 mm and functioned as nut. From the results of the experiment, it can be concluded that rod failure will happen if the depth of thread penetration is equal to or bigger than 90% of nut minor diameter. Meanwhile, thread failure will happen if the depth of thread penetration is less than 90% of nut minor diameter. It is also shown that the correlation between the number of thread and the maximum load which can be supported by the connection is not linear.
| Reference Key |
yohannes2008civilthe
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Yohannes Yohannes;Lydia F. Tjong;Agus Santosa Sudjono |
| Journal | Çankırı karatekin Üniversitesi İktisadi ve İdari bilimler fakültesi dergisi |
| Year | 2008 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.