modelo para diseñar y simular sistemas renovables de energía para calentar agua a dos niveles de temperatura//model to design and simulate renewables energy systems to hot water to two temperature level
Clicks: 172
ID: 229943
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.8
/100
172 views
25 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #24 of 76 articles by views in bmc musculoskeletal disorders
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Para esta investigación se obtuvo un modelo para el diseño y simulación de sistemas renovables de energía para producir agua caliente para diferentes temperaturas de uso, de bajo nivel de temperatura, hasta 60 oC, y de medio nivel de temperatura, hasta 100 oC, en zonas aisladas de las redes eléctricas. El modelo propuesto lleva a cabo simulaciones de diferentes configuraciones de sistemas de energía para determinar cuál es la más apropiada. Se obtuvo el diseño final y diferentes simulaciones de dos casos de estudio para una demanda energética, y se analizan los resultados alcanzados.
Palabras claves: modelo, diseñar, simular, sistemas renovables de energía, agua caliente.
______________________________________________________________________________
Abstract
For the investigation paper was carried out a model for the design and simulation of renewable energy systems to produce hot water for different temperatures of use, of low level, until 60 ºC, and medium level, until 100 ºC, in isolated zone of electric grid. The proposed model carries out simulations to different configurations of energy system to determine which the most appropriate. The final design and different simulations of two case studies for energy demand was obtained, and the results achieved are analyzed.
Key words: model, design, simulate, renewable energy system, hot water.
Palabras claves: modelo, diseñar, simular, sistemas renovables de energía, agua caliente.
______________________________________________________________________________
Abstract
For the investigation paper was carried out a model for the design and simulation of renewable energy systems to produce hot water for different temperatures of use, of low level, until 60 ºC, and medium level, until 100 ºC, in isolated zone of electric grid. The proposed model carries out simulations to different configurations of energy system to determine which the most appropriate. The final design and different simulations of two case studies for energy demand was obtained, and the results achieved are analyzed.
Key words: model, design, simulate, renewable energy system, hot water.
| Reference Key |
salas2015ingenieramodelo
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Joel Morales Salas;Conrado Moreno Figueredo;Johannes Mario Pfann |
| Journal | bmc musculoskeletal disorders |
| Year | 2015 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.