design and test of dual actuator nose wheel steering system for large civil aircraft
Clicks: 207
ID: 228954
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
207 views
30 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #27 of 48 articles by views in shanghai kou qiang yi xue = shanghai journal of stomatology
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
In order to improve aircraft ground handling characteristics and airport working efficiency, large handling angle and torque are requested for the nose wheel steering system of large civil aircraft. A following swivel selector valve is firstly designed to meet the demand for the hydraulic pressure commutating as soon as the dual actuator nose wheel steering mechanism passes through its dead center position. Considering the multiple objective functions of nose wheel steering mechanisms, those core design parameters are multiobjective optimized. A nose wheel steering electrohydraulic servo system with handling and antishimmy functions is designed for the steering mechanism. Then the prototypes of the steering mechanism and electrohydraulic servo system are researched to validate the design. Using the swing actuator to provide the load torque and ground excitation, the steering test bench is prepared to test the system working. The steering test and the antishimmy test are conducted to verify the functions of the system. The test results, such as steer angle, steer torque hydraulic pressure, and antishimmy torque, are analyzed in detail and compared with the theoretical results. The results show that the property of the prototype achieves the design objectives, such as work mode, steer angle, and steer torque.
| Reference Key |
zhang2016internationaldesign
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Ming Zhang;Rongmin Jiang;Hong Nie |
| Journal | shanghai kou qiang yi xue = shanghai journal of stomatology |
| Year | 2016 |
| DOI |
10.1155/2016/1626015
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.