thick film circuit layout and extraction of parameters using the magic layout editor
Clicks: 129
ID: 226886
1990
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
129 views
17 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #36 of 63 articles by views in anales de psicologia
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
A Technology file for the Magic layout editor has been developed in order to enable thick film circuit
designers to evolve fast solutions for layout with design rule checking, and plotting of the masks of
multilayer hybrid circuits. The hybrid design system developed provides for device placement, and
automatic routing techniques, in thick film circuits. Device placement is done by recalling from the
library the pad pattern that corresponds to the device to be positioned. Automatic routing is implemented
not only in multilayered circuits but also in single-layer technology (i.e. two possible types of metal
routed on the bare substrate) where dielectric tiles are automatically created at metal crossings, when
an electric contact is not desired.
| Reference Key |
avaritsiotis1990activethick
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;J. N. Avaritsiotis |
| Journal | anales de psicologia |
| Year | 1990 |
| DOI |
10.1155/1990/36026
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.