solid state batteries (ssbs) prepared with powder metallurgy route
Clicks: 227
ID: 224063
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.4
/100
227 views
28 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #12 of 28 articles by views in european romantic review
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The solid state batteries (SSBs) were prepared by powder metallurgy route. For making SSBs, a special die was designed. LiNiO2 and face centre cubic (fcc) TiB powders [1] were used to make cathodes for SSBs while such metals as Zn or Mg were used to make anodes. The SSBs made with LiNiO2 powder generated relatively low currents (1 to 2 μA) and voltage (0.4~0.9 V) at room temperature. The SSBs made with fcc-TiB cathode generated more power than do the SSBs made with LiNiO2 powder.
| Reference Key |
j.2013sciencesolid
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Hu J.;Zhao J.;Ren J.J. |
| Journal | european romantic review |
| Year | 2013 |
| DOI |
10.2298/SOS1302149H
|
| URL | |
| Keywords | Keywords not found |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.