design, development, and performance evaluation of a trash-board moldboard plow for the interaction between soil and straw with two different water content levels
Clicks: 181
ID: 222299
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
181 views
42 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #43 of 46 articles by views in drinking water engineering and science
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
A two-year field study was conducted to investigate the performance of a lightweight trash-board moldboard plow (with and without a trash-board), as influenced by stubble height and water content. Both fields were measured for the performance of a trash-board moldboard plow when used during the optimization of the plowing depth, the water content, and the reaction forces. The results showed that in the first year, when a trash-board was required, the results were significantly different. The fields had lower draft and reaction force in the soil with only stubble height, which was greater than that in the soil with dense straw for all water content levels. This was also observed in the second year for the whole depth. This study shows that the moldboard plow with a trash-board provided minimum draft and reaction forces with only straw and heavy straw. The results indicate that straw nearby shear significantly increased displacement for all treatments, with variance of straw nearby moldboard. Hence, the results verify that a trash-board continuously created large soil fragmentation with different water content. Straw labels create a position of straw which also allows for better results. It is important to install trash-boards with the moldboard plow for heavy straw incorporation.
| Reference Key |
abdallah2016agronomydesign,
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Farid E. Abdallah;Weimin Ding;Qishuo Ding;Genxing Pan |
| Journal | drinking water engineering and science |
| Year | 2016 |
| DOI |
10.3390/agronomy6020030
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.