structural analysis of spray-dried coconut shell liquid smoke powder [analisis struktural bubuk asap cair batok kelapa hasil pengeringan semprot]

Clicks: 339
ID: 215488
2012
Free PDF
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #5 of 28 articles by views in gynecologic and obstetric investigation

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
The research was aimed at determining spray drying conditions during the production of smoke particulate powder and its consequences on the physical properties of the product. The experiment was carried out using a complete randomized factorial design. Samples were three solution of chitosan (CS)-maltodextrin (MD) based nanoparticles i.e. CS (0.5% w/v) and MD (9.5% w/v) in acetic acid (1.0% v/v) without liquid smoke (F1), only MD (10% w/v) in liquid smoke (F2) and a mixture of CS (1.5% w/v) and MD (8.5% w/v) in liquid smoke (F5). Each sample solution was prepared at 10% solid contents with addition of 1.0% sodium tripolyphosphate. The experimental factors were inlet air temperatures (T) of 130°C (T1) and 150°C (T2) and feed flow rate (L) of 2.4 mL/minute (L1) and 5.1 mL/minute (L2). The parameters evaluated included bulk density, yield, moisture content, water activity, morphology and particle size. Results showed that the average particle sizes decreased when the inlet air temperature increased. The bulk density, moisture content and water activity of powders tended to decrease with the increase of inlet air temperature. In contrast, the powder yield increased with increasing of inlet air temperature. Furthermore, characteristics of the powder particulates were spherical with smooth surfaces for all treatments but when the inlet air temperatures was high the particles has deeper surfacial grooving and shriveled, especially for sample F1.
Reference Key
pranoto2)2012jurnalstructural Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Yudi Pranoto2);Bambang Setiaji3);Purnama Darmadji2);Satrijo Saloko1)*
Journal gynecologic and obstetric investigation
Year 2012
DOI
10.6066/jtip.2012.23.2.173
URL
http://journal.ipb.ac.id/index.php/jtip/article/view/6156
Keywords
nanoparticle chitosan maltodextrin

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.