comparaison d'un modèle empirique et d'un modèle physique de séchage de grains de maïs en lit fluidisé
Clicks: 251
ID: 200001
2010
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
251 views
29 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #20 of 42 articles by views in proceedings of 2018 ieee international conference on mechatronics and automation, icma 2018
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Comparison of two drying models applied to corn drying in fluidized bed. In this article, two predictive models of the temperature and water content of corn grains during their drying in a fluidized bed are compared. The first model is a simplified one, where the physical phenomena implied in the process are not described. It can be solved using freewares available on Internet. The second is a more complex model, based on the basic physical laws governing the phenomena of heat and mass transfer within the product. It requires the use of commercial finite element software to solve it. The two models are parameterized with four dryings where the temperature remains constant during the process, then validated on dryings with variable temperature and an intermittent drying. The two models are able to describe with an acceptable precision the evolutions of water content during continuous dryings, and to predict the evolutions of water content during dryings with variable temperature and the intermittent drying. The dynamic model is however not able to describe the evolution of the grains temperature during dryings at variable temperature with a precision lower than one degree Celsius. If this precision is sufficient, the use of the dynamic model will reduce considerably the costs in time and license of software for the modeling of the corn drying in a fluidized bed.
| Reference Key |
s.2010biotechnologie,comparaison
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Janas, S.;Malumba, P.;Deroanne, C.;Béra F. |
| Journal | proceedings of 2018 ieee international conference on mechatronics and automation, icma 2018 |
| Year | 2010 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.