estudio de las propiedades mecánicas y tribológicas de recubrimientos multicapa de espaciado sub-micrométrico
Clicks: 300
ID: 196375
2004
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
300 views
37 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #29 of 111 articles by views in medicinal chemistry (shariqah (united arab emirates))
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This work gathers a comparative study of the mechanical and tribological behaviour (microhardness under load, Young modulus, elasticplastic properties, friction and wear coefficients) of TiN/CrN and TiN/AlTiN multilayers deposited by conventional industrial PVD techniques. PVD multilayers with about between 50 nm individual layer thickness were deposited on flat samples of Co-cemented WC achieving a total thickness of about 2 microns. Mechanical and Tribological tests include microhardness under load at final loads between 10 mN aand 750 mN, Young modulus calculations and friction and wear tests.<br><br>El presente trabajo recoge un estudio comparativo de las propiedades mecánicas y tribológicas (microdureza, fluencia, módulo elástico, coeficientes de fricción y desgaste), de multicapas TiN/AlTiN y TiN/CrN depositadas mediante técnicas industriales de PVD. Las capas, de espesores comprendidos entre 25nm y 100nm, se depositaron secuencialmente sobre substratos de WC, hasta obtener un espesor total de unas 2 micras. El estudio mecánico y tribológico comparativo incluyó ensayos de microdureza a cargas entre 10 mN y 750 mN, módulo elástico, comportamiento frente a fluencia y coeficientes de fricción y desgaste.
| Reference Key |
j.2004boletnestudio
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Rodríguez, R. J.;Medrano, A.;Rico, M.;Lerga, B.;Martínez, R.;Bueno, R.;García, J. A. |
| Journal | medicinal chemistry (shariqah (united arab emirates)) |
| Year | 2004 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.