mechanical properties of dual phase steel quenched in bitumen medium

Clicks: 104
ID: 190897
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #34 of 37 articles by views in Chemical research in toxicology

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
The mechanical properties of a dual phase steel treated in different intercritical windows and subjected to bitumen as the quenching medium was investigated. The viscosity of the quenchant was altered at several rate, the morphology of phases formed was characterized. Also, the quenched samples produced ferrite-martensite phases obtained at different intercritical windows. The tensile and hardness behaviour of the structures was examined; and the microstructures were characterized. It was observed that samples intercriticaly heat treated at 790°C and held for 60mins, bitumen quenched at 125°C, offers the highest impact toughness, while its counterpart at 730°C soaked for 30mins, bitumen quenched at 125°C offered the least impact toughness value. Sample intercriticaly treated at 790°C and held for 45mins in a 150°C quenching, offered the peak hardness factor. However, samples at 790°C held at 45mins and bitumen quenched at 150°C possessed relatively the best combination of tensile properties, hardness and impact energy. The water quenched samples at 790°C held for 60mins has the peak hardness value. The micrographs as well showed a uniformly distributed dual phase structure of ferrite and martensite at various volume fractions.
Reference Key
adediran2015leonardomechanical Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Adeolu A. ADEDIRAN;Sunday ARIBO;Muhammed Olalekan Hakeem AMUDA
Journal Chemical research in toxicology
Year 2015
DOI
DOI not found
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.