diseño mc. lean‐anderson aplicado para obtener recubrimientos de electrodos aleados con carbono, cromo y titanio//mc. lean‐anderson design applied for recovered electrodes obtaining with carbon, chrome and titanium alloys
Clicks: 232
ID: 187744
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
232 views
27 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #18 of 76 articles by views in bmc musculoskeletal disorders
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
En el trabajo se estudia el comportamiento de electrodos recubiertos destinados al relleno superficial con el proceso de soldadura manual (SMAW, Shielded Metal Arc Welding). Para el diseño experimental se aplican un procedimiento de cálculo para el revestimiento y un plan de mezclas del tipo Mc. Lean-Anderson. En el diseño se conjuga una matriz compuesta por Calcita (26,73 %), Ferrosilicio (19,02 %),
Ferromanganeso (16,58 %), Rutilo (26,69 %), Silicato de Potasio (11,70 %) y diferentes cargas de aleación conformadas por Grafito (2 ≤ X1 ≤ 10 %), Ferro Cromo (5 ≤ X2 ≤ 35 %), ferrotungsteno (5 ≤ X3 ≤ 10 %) y matriz (60 ≤ X4 ≤ 80 %). En el trabajo se ofrecen criterios sobre la selección de los niveles límites a explorar durante el plan experimental, a partir de consideraciones sobre los materiales empleados, sus rangos y el procedimiento de fabricación de los electrodos.
Palabras claves: electrodos recubiertos, recubrimientos de electrodos, smaw, diseño de experimentos, relleno superficial.
_______________________________________________________________________________
Abstract
In the present work the behavior of recovered electrodes for superficial filler with Shielded Metal Arc Welding (SMAW) process is study. For the experimental design a coating calculation procedure and a Mc. Lean- Anderson type experimental plan are used. On the experimental design a matrix, composed by Calcite (26,73 %), Ferrosilicio (19,02%), Ferromanganese (16,58%), Rutile (26,69%), Potassium Silicate (11,70 %), and a alloy, conformed by Graphite (2 ≤ X1 ≤ 10), Ferro Chromium (5 ≤ X2 ≤ 35 %), ferrotungsteno (5 ≤ X3 ≤ 10 %) and matrix (60 ≤ X4 ≤ 80 %) is conjugated. In the work some criteria on the selection of the levels limits to explore during the experimental plan are offer, starting from considerations on the materials employees, their ranges and the procedure of production of the electrodes.
Key words: recovered electrodes, electrodes coating, smaw process, experimental design, hardfacing.
Ferromanganeso (16,58 %), Rutilo (26,69 %), Silicato de Potasio (11,70 %) y diferentes cargas de aleación conformadas por Grafito (2 ≤ X1 ≤ 10 %), Ferro Cromo (5 ≤ X2 ≤ 35 %), ferrotungsteno (5 ≤ X3 ≤ 10 %) y matriz (60 ≤ X4 ≤ 80 %). En el trabajo se ofrecen criterios sobre la selección de los niveles límites a explorar durante el plan experimental, a partir de consideraciones sobre los materiales empleados, sus rangos y el procedimiento de fabricación de los electrodos.
Palabras claves: electrodos recubiertos, recubrimientos de electrodos, smaw, diseño de experimentos, relleno superficial.
_______________________________________________________________________________
Abstract
In the present work the behavior of recovered electrodes for superficial filler with Shielded Metal Arc Welding (SMAW) process is study. For the experimental design a coating calculation procedure and a Mc. Lean- Anderson type experimental plan are used. On the experimental design a matrix, composed by Calcite (26,73 %), Ferrosilicio (19,02%), Ferromanganese (16,58%), Rutile (26,69%), Potassium Silicate (11,70 %), and a alloy, conformed by Graphite (2 ≤ X1 ≤ 10), Ferro Chromium (5 ≤ X2 ≤ 35 %), ferrotungsteno (5 ≤ X3 ≤ 10 %) and matrix (60 ≤ X4 ≤ 80 %) is conjugated. In the work some criteria on the selection of the levels limits to explore during the experimental plan are offer, starting from considerations on the materials employees, their ranges and the procedure of production of the electrodes.
Key words: recovered electrodes, electrodes coating, smaw process, experimental design, hardfacing.
| Reference Key |
gmez-prez2013ingenieradiseo
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Carlos René Gómez-Pérez;Ana Paula Perotti;Alejandro García-Rodríguez;José Antônio Esmerio-Mazzaferro;Arnaldo Rubén-Gonzalez;Ivan Guerra-Machado |
| Journal | bmc musculoskeletal disorders |
| Year | 2013 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.