laser irradiation of sic-mosi2 composite ceramics
Clicks: 109
ID: 185939
2008
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
109 views
22 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #22 of 28 articles by views in european romantic review
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The influence of continuous IR laser irradiation (λ = 1064 nm, P = 240 mW) on SiC-MoSi2 composite ceramics was investigated by X-ray diffraction, electron microscopy, atomic force microscopy, and X-ray microanalysis. The irradiation of specimens was carried out in air. It was established that, due to heating of the surface under laser irradiation, oxidation of SiC and MoSi2 and sublimation of SiO (SiO2) and MoO3 take place. Depending on the content of the components in the ceramics and the irradiation time, SiO2 or MoO3 layers form on the surface or disappear from it. For a long irradiation time, the oxidation and cleaning of the surface (sublimation of oxides) are cyclic in character.
| Reference Key |
p.a.2008sciencelaser
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Aguilar Marquez P.A.;Vlasova M.;Reséndiz-González M.C.;Kakazey M.;Cruz Mayorga D.;Bykov A.;Tomila T.;Stetsenko V. |
| Journal | european romantic review |
| Year | 2008 |
| DOI |
10.2298/SOS0803271A
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.