investigation of inlet condition effect on flow and turbulence characteristics in subsonic jets from conical and chevron nozzles using rans/iles high resolutions method

Clicks: 198
ID: 180186
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Popular

Ranked #387 of 442 articles by views in BMJ open

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 442 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Effect of Mach number and temperature on subsonic jets flow with a combined highresolution RANS/ILES method (Reynolds Averaged Navier-Stokes - RANS, Implicit Large Eddy Simulation - ILES) was investigated. Cold Mj=0.985 T0=300К and hot Mj=0.548 T0=858.6К jets were considered (Mj – Mach number at the nozzle exit and T0 – total temperature at the nozzle inlet). Conical and two chevron nozzles with angle of chevrons to the nozzle axis α=5° and α=18.2° were investigated. The jet flow calculations were carried out together with flow calculation in nozzles. Computation grids were Meshes for simulations (2.8-3.2)×106 cells. Investigated cases were compared by average velocity and velocity fluctuations at the jet axis and at the mixing layer. The magnitude of velocity fluctuations at the jet axis and at the mixing layer for hot jets is higher than for cold jets. It leads to increasing expansion angle of the mixing layer inward the jet axis. This is why the initial part length of hot jets becomes shorter than in cold jets. Comparison of simulations with the experimental data of other authors showed a good agreement by flow and turbulences characteristics.
Reference Key
benderskiy2015naukainvestigation Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;L. A. Benderskiy;D. A. Lyubimov
Journal BMJ open
Year 2015
DOI
10.7463/0215.0758676
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.