diagnostics of friction bearings by oil pressure parameters during cycle-by-cycle loading
Clicks: 230
ID: 178662
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Popular Article
30.0
/100
230 views
31 readers
AI Quality Assessment
Not analyzed
Readership in this journal
PopularRanked #43 of 72 articles by views in medical hypotheses
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Failures of friction bearings of the crank mechanism comprise from 5 to 25 % of engine failures. The analysis of the main reasons for failures shows that the dominant reasons are the following: excess of loading conditions; severe operating conditions; non-observance of the periodic maintenance of the lubrication system; violation of the procedure and conditions of maintenance (contamination, oil residues, etc.); use of poor-quality oils and filters, etc. It is possible to prevent the growth of failures of friction bearings by a continuous monitoring of their complex technical state. For that purpose, we have supposed that the technical state of the crankshaft main bearings of the crank mechanism can be determined by measuring the pressures in the central oil line and calculating their difference in the cycles with the maximum load and without it at different engine crankshaft rotation frequency. As a result of the experimental work, we developed a method for in-place diagnostics of the state of friction bearings of the internal combustion engine, as well as an instrument that provides loading conditions for the bearings of the crank mechanism. We obtained an experimental dependence for determining the wear degree of the crankshaft main journal by the difference in the minimum pressure amplitudes of two adjacent cycles during the operation of the diagnosed cylinder in various modes.
| Reference Key |
gritsenko2018tribologydiagnostics
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;A.V. Gritsenko;E.A. Zadorozhnaya;V.D. Shepelev |
| Journal | medical hypotheses |
| Year | 2018 |
| DOI |
10.24874/ti.2018.40.02.13
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.