residual stresses and mechanical properties of si3n4/sic multilayered composites with different sic layers
Clicks: 252
ID: 177753
2017
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
11.4
/100
38 views
38 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
The effect of residual stresses on the strength, toughness and work of fracture of Si3N4/SiC multilayered composites with different SiC layers has been investigated. It may be an effective way to design and optimize the mechanical properties of Si3N4/SiC multilayered composites by controlling the properties of SiC layers. Si3N4/SiC multilayered composites with different SiC layers were fabricated by aqueous tape casting and pressureless sintering. Residual stresses were calculated by using ANSYS simulation, the maximum values of tensile and compressive stresses were 553.2 MPa and −552.1 MPa, respectively. Step-like fracture was observed from the fracture surfaces. Fraction of delamination layers increased with the residual stress, which can improve the reliability of the materials. Tensile residual stress was benefit to improving toughness and work of fracture, but the strength of the composites decreased.
| Reference Key |
liu2017boletnresidual
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Shichao Liu;Yuanming Li;Ping Chen;Wenjie Li;Shixin Gao;Biao Zhang;Feng Ye |
| Journal | medicinal chemistry (shariqah (united arab emirates)) |
| Year | 2017 |
| DOI |
10.1016/j.bsecv.2016.11.003
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.