the influence of testing methodology and changes of microstructural parameters on resistance of duplex steel to sulphide stress cracking
Clicks: 187
ID: 172915
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
187 views
39 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #58 of 98 articles by views in journal of the formosan medical association = taiwan yi zhi
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The paper is focused on the evaluation of duplex ferritic-austenitic steel resistance to sulphide stress cracking (SSC). The testing was performed in accordance with the NACE TM 0177 Standard using tensile tests and four-point bending tests. The steel was always tested in two different structural states, in the as-received state (marked as AR), and after laboratory annealing by the mode of 800 °C/5h/air (marked as AN). Microstructure of steel in the AR state was formed by ferrite and austenite, the AN state was characterized by an disintegration of the part of ferrite and by formation of brittle σ phase. The aim of this study was to evaluate the effect of testing methodologies and changes of microstructural parameters of duplex steel resistance to SSC.
| Reference Key |
jonta2013metalurgijathe
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;P. Jonšta;J. Sojka;K. Matocha;Z. Jonšta |
| Journal | journal of the formosan medical association = taiwan yi zhi |
| Year | 2013 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.