theoretical and experimental research of hammer forging process of rim from az31 magnesium alloy
Clicks: 180
ID: 167762
2014
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
180 views
31 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #62 of 98 articles by views in journal of the formosan medical association = taiwan yi zhi
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The results of theoretical analysis and experimental tests of hammer forging process of rim part from AZ31 magnesium alloy are presented in this paper. On the basis of numerical simulation results, the analysis of limiting phenomena was made. These phenomena include: possibility of overlapping presence, not filling of die impression, overheating of material and cracks. The results of theoretical analysis provided the support for planning of experimental tests in industrial conditions. Forging tests were conducted in one of Polish forming plants, applying steam-air hammer of blow energy 63 kJ. On the basis of experimental verification, it was stated that it is possible to obtain rim forging from AZ31 alloy of assumed quality in the hammer forging process.
| Reference Key |
gontarz2014metalurgijatheoretical
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;A. Gontarz |
| Journal | journal of the formosan medical association = taiwan yi zhi |
| Year | 2014 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.