efecto de la microestructura en el comportamiento tribológico de materiales monolíticos de si3n4 y de compuestos si3n4–sic

Clicks: 313
ID: 167712
2000
Free PDF
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Popular

Ranked #48 of 111 articles by views in medicinal chemistry (shariqah (united arab emirates))

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
The tribological behaviour of various Si3N4 based materials, including Si3N4/SiC composites, has been analysed from room temperature up to 700ºC, and for sliding speeds between 0.5 and 2 m/s. Materials have been prepared by hot pressing at 1750ºC in nitrogen atmosphere, varying α-Si3N4 phase content, microstructure coarseness and shape and size of the SiC particles. Wear tests were performed in self-mated pairs using a pin on disc tribometer, without lubrication and at a fixed load of 5 N. Pin and disc worn surfaces were observed by scanning electron microscopy (SEM-EDS). Debris generated during tests was analysed by SEM-EDS and X-ray diffraction (XRD). Results showed friction, f, and wear coefficients, K, above 0.3 y 10-6 mm3N-1m-1, respectively. Wear mechanism depended on the microstructure and the mechanical properties of the materials.

Se ha analizado el comportamiento tribológico de materiales de Si3N4 y de compuestos Si3N4/SiC, desde temperatura ambiente hasta 700ºC y en el rango de velocidades 0.5-2 m/s. Los materiales se han preparado mediante prensado en caliente a 1750ºC en atmósfera de nitrógeno, variando el contenido en fase α-Si3N4, el tamaño medio de grano, y la morfología de las partículas de SiC adicionadas. Los ensayos se han realizado en pares homólogos utilizando un tribómetro del tipo punta sobre disco, sin lubricación y a una carga constante de 5 N. Las superficies de desgaste de las puntas y los discos se observaron en un microscopio electrónico de barrido con capacidad analítica (MEB-EDX). Los residuos generados durante los ensayos se analizaron mediante MEB-EDX y difracción de rayos X (DRX). Los resultados obtenidos en los ensayos daban valores de coeficiente de fricción, f, y de desgaste, K, superiores a 0.3 y 10-6 mm3N-1m-1, respectivamente. El mecanismo de desgaste predominante dependía de la microestructura y de las propiedades mecánicas del material ensayado.
Reference Key
f.2000boletnefecto Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors R. F. Silva, F. J. Oliveira, P. Miranzo, M. I. Osendi, J. R. Gomes
Are you one of these authors? Claim your profile
Journal medicinal chemistry (shariqah (united arab emirates))
Year 2000
DOI
DOI not found
URL
http://ceramicayvidrio.revistas.csic.es/index.php/ceramicayvidrio/article/view/838/866
Keywords
tribology wear silicon nitride glass Ceramics

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.