waste foundry sand reused as clay replacement for tile manufacture
Clicks: 110
ID: 164454
2014
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
110 views
34 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #22 of 28 articles by views in international journal of engineering and technology(uae)
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
In an effort to extend the reutilization of waste foundry sand (WFS), we evaluated the use of WFS as a replacement for clay in tile manufacturing. The effects of WFS addition on the properties of clay tile specimens were investigated at six different levels of WFS replacement: 0, 10, 15, 20, 40, and 60%. These specimens were fired at one of three different kiln temperatures: 1,000, 1,050, and 1,100°C. Various physical analyses were performed to determine the properties of the finished tiles. The results of this study indicate that the properties of the tile specimens were improved by WFS supplementation and that the optimal clay replacement level was 15% WFS.
| Reference Key |
luo2014internationalwaste
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Huan-Lin Luo;Deng-Fong Lin;Mei-Ling Chung;Lisa Y. Chen |
| Journal | international journal of engineering and technology(uae) |
| Year | 2014 |
| DOI |
10.1260/2046-0430.3.4.339
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.