behaviour of hybrid concrete columns under axial compression loads
Clicks: 112
ID: 159046
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
112 views
8 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #290 of 435 articles by views in acta botânica brasílica
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 435 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Hybrid Concrete Column (HCC) is composite column consists of two types of concrete, Normal Concrete (NC) and Self Compacted Concrete (SCC). The main objective of this work is to study the effect of outer to inner diameter ratio of hybrid concrete on the ultimate strength of column under the axial loading. Ten scaled columns (150 mm diameter and 600 mm length) were fabricated and cast with different ratio of NC to SCC and tested under axial loading. The test results were presented in term of loading and the axial and lateral strains at mid span of column length. It was found that the ultimate strength of column increased from 281 kN to 605 kN (215%). Also it was found that the strength of column increased when the SCC is in inner thickness rather than in outer thickness of the column and the strength increased with increasing the inner thickness of SCC.
| Reference Key |
ali2018matecbehaviour
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Resheq Ali |
| Journal | acta botânica brasílica |
| Year | 2018 |
| DOI |
10.1051/matecconf/201816204021
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.