study on stirring behavior of liquid steel in bottom-blowing ladle with immersed cylinder
Clicks: 325
ID: 156054
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
325 views
60 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #14 of 98 articles by views in journal of the formosan medical association = taiwan yi zhi
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The ladle bottom argon blowing process has an important influence on the refining liquid steel. The effects of diameters, insertion depth of immersed cylinder and bottom gas flow rate on the flow state of liquid steel and the amplitude of liquid steel surface are numerically simulated for 150t ladle. The results show that the slag entrapment of liquid steel surface can be confined by changing the diameters and insertion depths of immersed cylinder. The effects of gas flow rate, diameter and insertion depth with immersed cylinder on the flow of molten steel in the ladle were analyzed.
| Reference Key |
shen2016metalurgijastudy
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;M. G. Shen;D. H. Zhang;C. Wu;Q. Xu;Q.H.Qi |
| Journal | journal of the formosan medical association = taiwan yi zhi |
| Year | 2016 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.