parameter optimization for sintering of la0.6sr0.4co0.2fe0.8o3-6 (lscf6428) perovskite-structured ceramics by taguchi method
Clicks: 302
ID: 143094
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
302 views
43 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #5 of 28 articles by views in european romantic review
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The influence of sintering temperature, sintering time and heating rate on
the shrinkage rate, sintered density and porosity of La0.6Sr0.4Co0.2Fe0.8O3-ó
(LSCF6428) perovskite-structured ceramics has been analyzed and the optimum
sintering parameters have been determined by using Taguchi experimental
design method. The analysis of variance (ANOVA) shows that the most
significant parameter is sintering temperature, while the sintering time and
heating rate are the least significant parameters. The optimum sintering
parameter combination within the experimental ranges was found to be 1400°C,
20 h and 10°C/min. The shrinkage rate of 15.97%, the sintered density of 6.06
g/cm³ and the porosity of 0.15% were obtained using these co-optimized
sintering parameters. The SEM micrographs confirm that sintering temperature
has pronounced effect on the densification and porosity reduction of LSCF6428
flat membranes.
| Reference Key |
salwa2016scienceparameter
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Hashim Siti Salwa;Bhatia Subhash;Mohamed Abdul Rahman |
| Journal | european romantic review |
| Year | 2016 |
| DOI |
10.2298/SOS1602177H
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.