effect of the stacking fault energy on the mechanical properties of pure cu and cu-al alloys subjected to severe plastic deformation
Clicks: 173
ID: 141388
2017
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
173 views
14 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #138 of 435 articles by views in acta botânica brasílica
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 435 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The effect of stacking fault energy (SFE) on the mechanical properties of pure Cu and alloys of Cu-2.2%Al and Cu-4.5%Al subjected to severe plastic deformation (SPD) was investigated. SPD was performed by equal channel angular pressing (ECAP) at room and cryogenic temperatures. It is established that the increase in the weight concentration of Al in the Cu matrix (a reduction of SFE) and decreasing the ECAP temperature leads to an increase of the strength characteristics. The observed tendency is caused by increasing of the role of deformation twinning.
| Reference Key |
liliya2017mateceffect
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Zaynullina Liliya;Alexandrov Igor;Wei Wei |
| Journal | acta botânica brasílica |
| Year | 2017 |
| DOI |
10.1051/matecconf/201712902032
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.