the mechanical properties of medium density rigid polyurethane biofoam
Clicks: 238
ID: 134557
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
238 views
36 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #41 of 435 articles by views in acta botânica brasílica
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 435 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This paper described the effect of empty fruit bunch (EFB) loading in the medium density rigid foam, which was prepared from the palm kernel oil based polyol. The grounded 300μm EFB fiber was used as filler and its composition were varied from 3, 6, 9 and 12 weight percent. EFB filled PU shown good dimensional stability at 70°C and -15°C due expending and shrinking percentage are less than 0.8% and 0.4% respectively. The mechanical properties were increased linearly with the EFB loading until it reached an optimum percentage of the EFB. SEM images shows the usage of big size cylindrical particle suggested that the fiber pull out will responsible for the synergistic effect of flexibility and strength of the biofoam produced.
| Reference Key |
suzana2016matecthe
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Ali Ernie Suzana;Zubir Syazana Ahmad |
| Journal | acta botânica brasílica |
| Year | 2016 |
| DOI |
10.1051/matecconf/20163901009
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.