properties of highly porous cordierite ceramic obtained by direct foaming and gelcasting method
Clicks: 275
ID: 131964
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
275 views
55 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #17 of 50 articles by views in european journal of organic chemistry
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The highly porous cordierite ceramics were fabricated combining the merits of direct foaming and gelcasting method. The content of gum arabic had a great influence on the foaming capacity and the stability of the wet slurry foam. And the foaming capacity mainly affected the porosity while the stability mainly affected the pore size. The highest porosity of 90% was obtained at 0.4 wt.% gum arabic content and the smallest pore size and the most homogeneous pore distribution were arrived at 1.2 wt.% gum arabic content. As the sintering temperature increased, the porosity and pore size decreased but the uniformity of the pore distribution increased. Moreover, the thermal conductivity was mainly affected not only by the porosity, but also by the sintering degree of the cordierite substrate.
| Reference Key |
li2016ceramics-siliktyproperties
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Ye Li;Wei Cao;Gong Lunlun;Zhang Ruifang;Cheng Xudong |
| Journal | european journal of organic chemistry |
| Year | 2016 |
| DOI |
10.13168/cs.2016.0014
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.