diffusion coefficients of the binary liquid systems

Clicks: 180
ID: 131724
1999
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Popular

Ranked #15 of 30 articles by views in cell stress & chaperones

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
A procedure in which Stokes diffusion cell was used is given for the determination of the Stokes diffusion constant for the binary liquid systems. Experiments were repeated until reproducible results were obtained. The effect of stirring on diffusion was examined and the stirring rate of 60 rpm was used in subsequent experiments.The diaphragm of the cell was calibrated at 298 K by diffusing 0.1 N potassium chloride. The experimental cell constant(?) was found 0.1997 cm-2. The binary experiments were performed in a temperature controller water bath at 290 K. The experimental diffusion coefficients of the dimethylphtalate-acetic acid, diethylphtalate-acetic acid and benzyl alcohol-acetic acid were found 0.927x10-5cm2/s, 0.623x10-5cm2/s and 1.067x10-5cm2/s, respectively. Furthermore, diffusion coefficients were calculated by the Scheibel and Wilke-Chang methods and compared with experimental values.
Reference Key
kirbalar1999pamukkalediffusion Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Ş. İsmail KIRBAŞLAR;Beşir TATLI;Tayfun EKREN;Umur DRAMUR
Journal cell stress & chaperones
Year 1999
DOI
DOI not found
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.