Study on the transient impact energy of metal droplet transfer in P-MIG welding based on acoustic emission signals analysis
Clicks: 176
ID: 107375
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
176 views
17 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #75 of 88 articles by views in materials & design
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
According to the structure-borne acoustic emission (AE) signals detected in pulsed metal inert gas (P-MIG) welding on aluminum alloy, the energy gradient and total energy of AE signals were used to describe the rate of impact energy and total impact energy coming from metal droplet transferred into molten pool. The results showed that there were three types of energy gradient curves according to three modes of metal droplet transfer (MDT). The characteristics of energy gradient curves had a close relation to the transient impact energy of MDT. The energy gradient of MDT decreased with the rise of pulse frequency during the impact process of not only one metal droplet but also several metal droplets within 0.04 s. So, the variation rate of impact energy was lowered with the raise of transfer frequency on the premise of one droplet per pulse mode. Total energy of AE signals coming from not only one metal droplet but also several metal droplets within 0.04 s also demonstrated a downward trend. On the premise of one droplet per pulse mode, the variation of the transient impact energy accorded with an exponential attenuation model. Keywords: Impact energy, Metal droplet transfer, Metal inert gas welding, Pulse, Acoustic emission
| Reference Key |
luo2016studymaterials
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Luo, Yi;Zhu, Yang;Xie, Xiaojian;Wan, Rui; |
| Journal | materials & design |
| Year | 2016 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.