[1] An attempt to make a reliable assessment of the wet steam flow field in the de Laval nozzle

[2] Pin-fin metal alloy structures enhancing heat transfer in PCM-based heat storage units

[3] Precise determination of LJ parameters and Eucken correction factors for a more accurate modeling of transport properties in gases

[4] Soft and hard computation methods for estimation of the effective thermal conductivity of sands

[5] Liquid-liquid two-phase flow patterns in ultra-shallow straight and serpentine microchannels

[6] Modeling of thermal performance of multilayer protective clothing exposed to radiant heat

[7] Heat and mass transfer boundary conditions at the surface of a heated sessile droplet

[8] Comparing negative emissions and high renewable scenarios for the European power system

[9] Dryout-type critical heat flux in vertical upward annular flow: effects of entrainment rate, initial entrained fraction and diameter

[10] Experimental study of the internal flow in freezing water droplets on a cold surface

[11] The influence of convection drying on the physicochemical properties of yacón ( Smallanthus sonchifolius )

[12] Modelling heat transfer during flow through a random packed bed of spheres

[13] Carbonate dual-phase improves the performance of single-layer fuel cell made from mixed ionic and semiconductor composite

[14] Evaluation of latent heat storage in mortars containing microencapsulated paraffin waxes – a selection of optimal composition and binders

[15] Thermal conductivity of sands

[16] Recent advances in high-throughput mass spectrometry that accelerates enzyme engineering for biofuel research

[17] Numerical modelling of effective thermal conductivity for modified geomaterial using lattice element method

[18] Power converters for battery energy storage systems connected to medium voltage systems: a comprehensive review

[19] Assessment of the naphthalene sublimation technique for determination of convective heat transfer in fundamental and industrial applications

[20] Effective thermal conductivity of unsaturated granular geocomposite using lattice element method

[21] BMC Energy : a home for all energy and fuels research

[22] Effects of nanoscale zerovalent cobalt on growth and photosynthetic parameters of soybean Glycine max (L.) Merr. DT26 at different stages

[23] Development and validation of a mathematical model to predict the thermal behaviour of nanofluids

[24] Lattice element method for simulations of failure in bio-cemented sands

[25] Experimental and numerical analysis of composite latent heat storage in cooling systems for power electronics

[26] The effective thermal conductivity of double-reinforced composites

[27] Development of apple chips technology

[28] Discrete and continuous modelling of convective heat transport in a thin porous layer of mono sized spheres

[29] Modelling the dynamics of the flow within freezing water droplets

[30] Electrochemical study of TiO2 in aqueous AlCl3 electrolyte via vacuum impregnation for superior high-rate electrode performance

[31] The influence of a porous, compliant layer with overlying discrete roughness elements as exhaust pipe wall on friction and heat transfer

[32] Development of model for studies on momentum transfer in electrochemical cells with entry region coil as turbulence promoter

[33] Shipping and the Paris climate agreement: a focus on committed emissions

[34] Recent progress in the development of advanced biofuel 5-ethoxymethylfurfural

[35] Influence of surface roughness on heat transfer during quenching hot metals with different nozzles

[36] Flow boiling heat transfer characteristics using the modified eulerian and wall heat balance model

[37] Hydrocyclone separation performance influenced by feeding solid concentration and correcting separation size

[38] Innovative application of the moisture analyzer for determination of dry mass content of processed cheese

[39] Numerical identification of the thermal properties of early age concrete using inverse heat transfer problem

[40] A meshless procedure for analysis of fluid flow and heat transfer in an internally finned square duct

[41] Modelling and optimization of a natural gas supply system at a transient stage: a case study of China

[42] A review of the applications of fuel cells in microgrids: opportunities and challenges

[43] Experimental and numerical study of pressure drop in pipes packed with large particles

[44] Experimental investigation of heat transfer in pin-fins heat sinks for cooling applications

[45] Optimization of energy storage and system flexibility in the context of the energy transition: Germany’s power grid as a case study

[46] Enhanced economic feasibility of excess sludge treatment: acid fermentation with biogas production

[47] Waste to bioenergy: a review on the recent conversion technologies

[48] Bioenergy utilization for a low carbon future in the UK: the evaluation of some alternative scenarios and projections

[49] Study of energy density of adsorption-based thermal energy storage system under different operating conditions for SAPO-34

[50] Hydrogen and deuterium separation on metal organic frameworks based on Cu- and Zn-BTC: an experimental and theoretical study

[51] Optimization of energy storage and system flexibility in the context of the energy transition: Germany’s power grid as a case study - BMC Energy

[52] Experimental design of a “Snap-on” and standalone single-bed oxygen concentrator for medical applications - Adsorption

[53] Soft and hard computation methods for estimation of the effective thermal conductivity of sands - Heat and Mass Transfer

[54] Activity coefficient models for accurate prediction of adsorption azeotropes - Adsorption

[55] The role of the dendritic growth model dimensionality in predicting the Columnar to Equiaxed Transition (CET) - Heat and Mass Transfer

[56] Dr. Shivaji Sircar: the Air Products years (1973–2001) - Adsorption

[57] 7th European Thermal-Sciences Conference - Heat and Mass Transfer

[58] Adsorption for efficient low carbon hydrogen production: part 1—adsorption equilibrium and breakthrough studies for H2/CO2/CH4 on zeolite 13X - Adsorption

[59] Optimization of energy storage and system flexibility in the context of the energy transition: Germany’s power grid as a case study - BMC Energy

[60] Pin-fin metal alloy structures enhancing heat transfer in PCM-based heat storage units - Heat and Mass Transfer

[61] Soft and hard computation methods for estimation of the effective thermal conductivity of sands - Heat and Mass Transfer

[62] Nitrogen rejection from landfill gas using Pressure Swing Adsorption - Adsorption

[63] Prediction of affinity coefficient for estimation of VOC adsorption on activated carbon using V-matrix regression method - Adsorption

[64] Adsorption for efficient low carbon hydrogen production: part 2—Cyclic experiments and model predictions - Adsorption

[65] The role of the dendritic growth model dimensionality in predicting the Columnar to Equiaxed Transition (CET) - Heat and Mass Transfer

[66] 7th European Thermal-Sciences Conference - Heat and Mass Transfer

[67] Connecting theory and simulation with experiment for the study of diffusion in nanoporous solids - Adsorption

[68] Activity coefficient models for accurate prediction of adsorption azeotropes - Adsorption

[69] Measurement and interpretation of unary supercritical gas adsorption isotherms in micro-mesoporous solids - Adsorption

[70] Economic assessment of a natural gas upgrading process using pressure vacuum swing adsorption for nitrogen removal - Adsorption

[71] High magnetic field impact on the natural convection behaviour of a magnetic fluid - Heat and Mass Transfer