[1] damage detection in stiffened plates by wavelet transform

[2] assessment of flow interactions between circular cylinders and naca-0018 hydrofoils at low reynolds numbers

[3] h∞ filter for flexure deformation and lever arm effect compensation in m/s ins integration

[4] field investigations on port non-tranquility caused by infra-gravity water waves

[5] identifying the issue of reducing the emission of harmful compounds in the exhaust gas from marine main engines and description of the emission process of these compounds in probabilistic approach

[6] virtual maneuvering test in cfd media in presence of free surface

[7] scenario based optimization of a container vessel with respect to its projected operating conditions

[8] towed underwater piv measurement for free-surface effects on turbulent wake of a surface-piercing body

[9] thermal distortion analysis method for tmcp steel structures using shell element

[10] the investigation of ship maneuvering with hydrodynamic effects between ships in curved narrow channel

[11] a study on ship automatic berthing with assistance of auxiliary devices

[12] on resistance reduction of a hull by trim optimization

[13] wind and wave setup contributions to extreme sea levels at a tropical high island: a stochastic cyclone simulation study for apia, samoa

[14] antimacrofouling efficacy of innovative inorganic nanomaterials loaded with booster biocides

[15] a chinese family with axenfeld-rieger syndrome: report of the clinical and genetic findings

[16] numerical procedure for the vibration analysis of arbitrarily constrained stiffened panels with openings

[17] in vitro inhibition of acetylcholinesterase, alphaglucosidase, and xanthine oxidase by bacteria extracts from coral reef in hainan, south china sea

[18] further validation of the hybrid particle-mesh method for vortex shedding flow simulations

[19] an experimental and numerical study of long wave run-up on a plane beach

[20] design optimization for a truncated catenary mooring system for scale model test

[21] estimation of slamming coefficients on local members of offshore wind turbine foundation (jacket type) under plunging breaker

[22] welding deformation analysis based on improved equivalent strain method considering the effect of temperature gradients

[23] geometry of wave-formed orbital ripples in coarse sand

[24] on the optimization of point absorber buoys

[25] simulating three dimensional wave run-up over breakwaters covered by antifer units

[26] temperature effects on the growth rates and photosynthetic activities of symbiodinium cells

[27] a comparison between fuel cells and other alternatives for marine electric power generation

[28] the effects of lng-tank sloshing on the global motions of flng system

[29] extraction of the mode shapes of a segmented ship model with a hydroelastic response

[30] the pressure distribution on the rectangular and trapezoidal storage tanks' perimeters due to liquid sloshing phenomenon

[31] weight reduction and strengthening of marine hatch covers by using composite materials

[32] erratum: garzon, j.l.; ferreira, c.m. storm surge modeling in large estuaries: sensitivity analyses to parameters and physical processes in the chesapeake bay. j. mar. sci. eng. 2016, 4, 45

[33] model test of new floating offshore wind turbine platforms

[34] global hydroelastic analysis of ultra large container ships by improved beam structural model

[35] disease resistant fish and shellfish are within reach: a review

[36] hydrodynamic interaction with an array of porous circular cylinders

[37] numerical study of hydrodynamic interaction on a vessel in restricted waterways

[38] an improved solid boundary treatment for wave–float interactions using isph method

[39] numerical modelling and study of parametric rolling for c11 containership in regular head seas using consistent strip theory

[40] the implications of oil exploration off the gulf coast of florida

[41] design of an adaptive backstepping controller for auto-berthing a cruise ship under wind loads

[42] reducing reliability uncertainties for marine renewable energy

[43] measurement of diurnal body tilt angle distributions of threeline grunt parapristipoma trilineatum using micro-acceleration data loggers

[44] engineering criticality analysis on an offshore structure using the first- and second-order reliability method

[45] investigation of structural responses of breakwaters for green water based on fluid-structure interaction analysis

[46] a numerical study on manoeuvrability of wind turbine installation vessel using openfoam

[47] exploring water level sensitivity for metropolitan new york during sandy (2012) using ensemble storm surge simulations

[48] a survey: application of geometric modeling techniques to ship modeling and design

[49] verification of cfd analysis methods for predicting the drag force and thrust power of an underwater disk robot

[50] line force and damping at full and partial stator overlap in a linear generator for wave power

[51] nearshore waves and longshore sediment transport along rameshwaram island off the east coast of india

[52] research on the motion characteristics of a trans-media vehicle when entering water obliquely at low speed

[53] experimental investigation of frictional resistance reduction with air layer on the hull bottom of a ship

[54] directional storm surge in enclosed seas: the red sea, the adriatic, and venice

[55] subsidence estimation of breakwater built on loosely deposited sandy seabed foundation: elastic model or elasto-plastic model

[56] study of the sealing performance of tubing adapters in gas-tight deep-sea water sampler

[57] study on icebreaking performance of the korea icebreaker araon in the arctic sea

[58] determination of global ice loads on the ship using the measured full-scale motion data

[59] aging effects on ship structural integrity

[60] recent advances in the study of marine microbial biofilm: from the involvement of quorum sensing in its production up to biotechnological application of the polysaccharide fractions

[61] development of damage control training scenarios of naval ships based on simplified vulnerability analysis results

[62] experimental investigation on stern-boat deployment system and operability for korean coast guard ship

[63] on the effects of hull-girder vibration upon fatigue strength of a post-panamax container ship disaggregated by short-term sea state

[64] verification of cfd analysis methods for predicting the drag force and thrust power of an underwater disk robot

[65] concept analysis of competitiveness

[66] development of paint area estimation software for ship compartments and structures

[67] evaluating key environmental risk factors for pollution at international ports in taiwan

[68] a study for production simulation model generation system based on data model at a shipyard

[69] representing and constructing liquefaction cycle alternatives for flng feed using system entity structure concepts

[70] self-similarity in the equation of motion of a ship

[71] approximate natural vibration analysis of rectangular plates with openings using assumed mode method

[72] performance analyses of naval ships based on engineering level of simulation at the initial design stage

[73] ice forces acting on towed ship in level ice with straight drift. part i: analysis of model test data

[74] on the material properties of shell plate formed by line heating

[75] colour sonar: multi-frequency sidescan sonar images of the seabed in the inner sound of the pentland firth, scotland

[76] Ocean Literacy for Workforce Development in the Shipbuilding and Offshore Renewable Energy Sectors in Europe, in Support of the Blue Economy : tthe MATES Project: Maritime Alliance for fostering the European Blue economy through a Marine Technology Skilling Strategy

[77] Research on GHGs emission accounting method in shipbuilding industry

[78] the direct trade of woods for the spanish shipbuilding industry and other goods from the southern baltic sea region, 1700-1783

[79] characterization of total and size-fractionated manganese exposure by work area in a shipbuilding yard