Energy recovery and nutrients recycling from municipal sewage sludge.

Clicks: 340
ID: 96795
2020
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Emerging

Ranked #164 of 637 articles by views in The Science of the total environment

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 637 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
Hydrothermal Liquefaction (HTL) could be a promising and better alternative to other techniques for energy recovery from municipal sewage sludge (MSS). However, the nutrients (i.e., N, and P) recovery potential from the byproducts, generated in the HTL of MSS, needs to be studied so that a comprehensive sludge management practice could be adopted. In this study, HTL process temperature (275-400 °C), and reaction time (30-120 min) were first investigated for biocrude yield and release of the nutrients to the aqueous phase liquid (APL) and biochar. The maximum energy recovery (i.e., 59%) and maximum energy return on investment (i.e., 3.5) were obtained at 350 °C and 60 min of holding time. With the increase in HTL reaction time, the concentration of nitrogen in the APL increased (5.1 to 6.8 mg/L) while the concentration of phosphorus decreased (0.89 to 0.22 mg/L); the opposite was observed for the biochar. The nutrient recycling efficiency from the APL using microalgae was found to be strain-specific; nitrogen recycling efficiency by Picochlorum sp. and Chlorella sp. were 95.4 and 58.6%, respectively. The APL, derived from 1 kg MSS, could potentially produce 0.49 kg microalgal biomass. Since the concentrations of various metals in the biochar samples were substantially lower compared to their concentrations in raw MSS, the application of biochar as a soil conditioner could be very promising. Overall, net positive energy could be recovered from MSS using the HTL process, while the nutrients in the APL could be used to cultivate specific microalgae, and biochar could be applied to enhance the soil quality.
Reference Key
das2020energythe Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Das, Probir;Khan, Shoyeb;AbdulQuadir, Mohammed;Thaher, Mahmoud;Waqas, Muhammad;Easa, Ahmed;Attia, Essam Shabaan Mohamed;Al-Jabri, Hareb;
Journal The Science of the total environment
Year 2020
DOI
S0048-9697(20)30285-0
URL
Keywords
biochar microalgae hydrothermal liquefaction energy recovery nutrient recycling biocrude municipal sewage sludge

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.