Application of a hydroxyl-radical-based disinfection system for ballast water.

Clicks: 267
ID: 95841
2018
Article Quality & Performance Metrics
Overall Quality Improving Quality
0.0 /100
Combines engagement data with AI-assessed academic quality
AI Quality Assessment
Not analyzed
Abstract
A hydroxyl radical (OH) ballast water treatment system (BWTS) was developed and applied to inactivate entrained organisms in a 10,000-ton oceanic ship, where OH was produced by a strong ionization discharge combined with a water jet cavitation effect. The calculated OH generation rate was 1373.4 μM min in ballast water, which is much higher than that in other advanced oxidative processes such as photocatalysis. As a result, non-indigenous red tide algae were inactivated to meet the ballast water discharge standards (<10 cells mL) of the International Maritime Organization. The ratio of variable fluorescence to maximum fluorescence (F/F) for algal chlorophyll rapidly decreased to zero within a contact time of only 6 s, indicating complete inactivation of algae. Observation under a scanning electron microscope showed no cellular materials were released by algal cells upon OH inactivation. A risk assessment of the OH treatment system was conducted, and the ratios of predicted environmental concentrations to predicted no effect concentrations of all detected disinfection byproducts were less than 1, even at a worst-case oxidant concentration of 2.41 mg L. Ship ballast water treated using OH inactivation is safe for marine environments. Finally, the energy consumption and operational costs of the OH BWTS were found to be 0.033 kWh m and CNY 0.03 m, respectively.
Reference Key
bai2018applicationchemosphere Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Bai, Mindong;Tian, Yiping;Yu, Yixuan;Zheng, Qilin;Zhang, Xiaofang;Zheng, Wu;Zhang, Zhitao;
Journal Chemosphere
Year 2018
DOI
S0045-6535(18)31083-X
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.