A Novel Position and Orientation Sensor for Indoor Navigation Based on Linear CCDs.
Clicks: 213
ID: 92258
2020
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Steady Performance
30.0
/100
212 views
15 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
The position and orientation of a mobile agent, such as robot or drone, etc., should be estimated in a timely way during operation in the structured indoor environment, so as to ensure the security and efficiency of task execution. Concerning the problem that the position and orientation are often estimated separately by different kinds of sensors in the off-the-shelf methods, we design a novel position orientation sensor (POS). The POS consists of four pairs of linear charge-coupled devices (CCDs) and cylindrical lenses, which can estimate the 3D coordinate of the anchor in the POS's field of view. After detecting at least three anchors in its field of vision sequentially, the Rodrigues coordinate transformation algorithm is utilized to estimate the position and orientation of POS simultaneously. Meanwhile, the position and orientation are estimated at the receiver side. Hence there is no privacy concern associated with this system. The architecture of the proposed POS is symmetrical and redundant, even if one of the linear CCDs or cylindrical lens malfunctions, the whole system could still work normally. The proposed method is cost-effective and easily extends to a wide range. The numerical simulation demonstrates the feasibility and high accuracy of the proposed method, and it outperforms the off-the-shelf methods.
| Reference Key |
wang2020asensors
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Wang, Chuang;Xing, Li;Tu, Xiaowei; |
| Journal | sensors |
| Year | 2020 |
| DOI |
E748
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.