Effect of veneer side wettability on bonding quality of Eucalyptus globulus plywoods prepared using a tannin-phenol-formaldehyde adhesive.
Clicks: 392
ID: 87704
2003
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Star Article
81.9
/100
392 views
283 readers
Trending
AI Quality Assessment
Not analyzed
Readership in this journal
StarRanked #21 of 274 articles by views in Bioresource technology
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 274 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The influence of rotary peeling on the different behaviour of tight and loose sides of Eucalyptus globulus veneers has been studied. The presence of lathe checks on the loose sides favours wettability, the contact angle decreasing more rapidly on these sides than on tight sides. Additionally, pine bark tannins improved wettability due to their surfactant character. Bonding quality tests carried out on plywoods prepared using a tannin-phenol-formaldehyde adhesive showed that fracture almost invariably occurred in a glue line with at least one loose side, where wood failure appeared. This behaviour, confirmed by analysing the glue lines by means of fluorescence microscopy, was due to the large surface alterations of the loose sides which reduced mechanical strength but allowed greater penetration of the adhesive giving rise to high wood failure.
| Reference Key |
vzquez2003effectbioresource
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Vázquez, G;González-Alvarez, J;López-Suevos, F;Antorrena, G; |
| Journal | Bioresource technology |
| Year | 2003 |
| DOI |
DOI not found
|
| URL | URL not found |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.