Jamomerske meritve pri gradnji jaška NOP II ( = Mine surveillance measurements during the building of NOP II shaft)
Clicks: 316
ID: 87106
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
316 views
54 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #4 of 4 articles by views in geodetski vestnik
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The Velenje Coal Mine is building a new shaft NOP II for the transportation of coal from the mine. The entrance of the shaft, which is determined on the surface, and the bottom of the shaft, which is expected in the point determined at the bottom of the shaft, must be within the same vertical and horizontal coordinate system. The starting points for the measurements are the points determined on the surface, which are stable or have a determined direction and velocity. The transfer of the coordinate system from the surface into the shaft can be carried out with the measurements using various methods. The results of the measurements and the calculations are the coordinate points in the shaft that are in the same coordinate system as those on the surface. They are very suitable for the determination of the designed NOP II shaft. At the beginning of this task, we planned to determine the coordinates of the starting points with a maximum precision. Based on the results of an analysis, we can conclude that we performed each phase of the work very well and achieved the tasks set.
| Reference Key |
kozelj2015jamomerskegeodetski
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Koželj, Matjaž;Slatinšek, Jure;Ambrožič, Tomaž; |
| Journal | geodetski vestnik |
| Year | 2015 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.